Ice chain saw is mainly used to cut dense layers of ice either to cut the layer into big blocks or to make holes into the ice for fishing. Though a chain saw is used to cut or pierce large ice layers, a hand saw might be necessary to cut the required opening for the chain saw to work. Whether you are cutting larger blocks of ice into smaller pieces or spearing holes into ice for fishing, only the best saw for cutting ice should be your choice.
I use full comp chisel chain as long as the ice is clean no problem. To those worried about me using a chain saw on a lake I have been using nothing but pure Canola now for years be it wood or ice! But you don’t need bar lube for cutting ice the water will keep everything cool and lubricated Ice is very easy to cut and cleans your saw up too.
“After starting a hole in the ice with your spud, you must switch to your chainsaw and angle its blade as you cut. To cut a straight line in the ice, you should keep the blade of your chainsaw at a forty-five degree to a sixty degrees angle, not straight upward and downward, and make the cuts in ice as you push its blade into the ice, not while you draw it backward,” Thompson said. The lessons learned over the years with my chainsaw include; before shutting the chainsaw off, I always walk a distance away from the group of my students and rev the chainsaw up to clear any water, then it is shut off and place up off the ice. “My chainsaw is more than thirty years old and, now I am using it on ice only. It looks and runs like a brand new one. Check the length of the board, its appropriate distance, and then use the chainsaw to cut another hole in the ice ahead of the board. If you notice sawdust on the ice, you should stop immediately as the board is being cut, so you should quickly move further away.”
best chainsaw for ice Related Question:
Do you need a special chainsaw to cut ice?
Yes, you can cut ice with your chainsaw. You don’t have to apply any mineral oil to prevent the water from pollution. To prevent the blade from rusting, you will have to look after your chainsaw. A brief answer is good for those who are short of time.
Can you use an electric chainsaw to cut ice?
Electric chainsaw is not much more than a glorified limb trimmer. It will cut thicker ice but it will be slow and I guarantee the entire time you will be wondering why you didn’t just buy a gas powered saw.
How do you cut ice on a lake?
Try using a spud bar or digging iron Like the axe, you will be chipping out the ice to make a hole. 12 inches of ice would be the max thickness to try this on, otherwise it just takes too long. Always start the hole bigger than the final size you want.
How do you cut ice cubes?
The serrated knife helps with cutting ice, as the jagged edges create an easier cut through the cold, hard surface. Cut Things Down to Size: Before cutting smaller pieces of ice for your drinks, cut the large block in half evenly from the middle, and then again into fourths.
Can chainsaws cut in water?
No, you can not run a chainsaw in the water. You can work in the rain and wetlands, but you cannot submerge a regular chainsaw underwater to cut anything under the water surface. If you submerge a gas-powered chainsaw underwater, the water will get into the engine and ruin your chainsaw.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What bait do you use for ice fishing?
For ice fishing live bait, try wax worms (bee moth larva), maggots, spikes (fly larvae), wigglers (mayfly larvae) or minnows. You can drop your bait and leave it alone, or you can slowly jig to attract the fish. Ice fishing jigging also works with artificial ice fishing bait.
What is a spud bar for ice fishing?
A spud bar is a long piece of steel, generally about 4-5 feet in length with a tapered point at the end. THAT’S IT! To some anglers it’s something they leave out of their vehicle when embarking for the ice as it may be deemed inconvenient and cumbersome.
What can I use instead of an auger?
A spud bar or digging iron will work fine. I made my spud bars out of rebar and a piece of flat steel that I machined and hardened.
Do you need an auger for ice fishing?
“Ice fishing can be kept simple,” says Thielen. “You need a good six-inch hand auger like a Strikemaster Lazer auger, until the ice hits eight inches thick.” Thielen repeated the need to drill down as straight as possible. “It’s much easier to cut through when drilling straight,” he said.
Does boiling water make clear ice?
“Boiling water does not make clear ice. It may make ice a little bit clearer than without, but it makes no significant difference compared to using directional freezing.” There are two methods of directional freezing to try at home—one more involved than the other, but both equally as effective.
How do bars make clear ice?
Fundamentally, creating clear ice requires slow, directional freezing, allowing air and impurities to be forced away as it freezes. This allows the top surface of the water to begin freezing while the bottom portion remains insulated and stays liquid.
Why do my ice balls keep cracking?
The primary reason for causing ice to crack is freezing it too quickly. The outside freezes first and when the inside freezes, it expands and cause the ice ball to crack. Turn up the temperature of your freezer, wrap the tray in a hand towel, or put the ice tray in a container.