I use full comp chisel chain as long as the ice is clean no problem. To those worried about me using a chain saw on a lake I have been using nothing but pure Canola now for years be it wood or ice! But you don’t need bar lube for cutting ice the water will keep everything cool and lubricated Ice is very easy to cut and cleans your saw up too.
Ice chain saw is mainly used to cut dense layers of ice either to cut the layer into big blocks or to make holes into the ice for fishing. Though a chain saw is used to cut or pierce large ice layers, a hand saw might be necessary to cut the required opening for the chain saw to work. Whether you are cutting larger blocks of ice into smaller pieces or spearing holes into ice for fishing, only the best saw for cutting ice should be your choice.
When you running your saw on the ice for the first time of the season, do a bunch of cutting before you get to your spot. That will flush and clean out your “Ice saw” so when you actually get to your spot you hole is nice and clean with no oil slick…. I screw in a T ice anchor before cutting as an aid to lift the block up and out before cutting… Make your cuts at a slight angle so your block can only come out one way. Ever since I bought my ice saw I have never needed the chainsaw for cutting a spear hole.
best chainsaw chain for cutting ice Related Question:
Can you use a chainsaw to cut through ice?
Yes, you can cut ice with your chainsaw. You don’t have to apply any mineral oil to prevent the water from pollution. To prevent the blade from rusting, you will have to look after your chainsaw.
What is the fastest cutting chain for a chainsaw?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
How do you cut ice on a lake?
Try using a spud bar or digging iron Like the axe, you will be chipping out the ice to make a hole. 12 inches of ice would be the max thickness to try this on, otherwise it just takes too long. Always start the hole bigger than the final size you want.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chain stays sharp the longest?
Husqvarna Chainsaw Chain 16″ . The x-Cut line of Husqvarna chains is also designed to stay sharp longer, so you can cut for a longer amount of time before the chain needs sharpening.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
How often should you change the bar on a chainsaw?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
How do you cut ice?
“Ice fishing can be kept simple,” says Thielen. “You need a good six-inch hand auger like a Strikemaster Lazer auger, until the ice hits eight inches thick.” Thielen repeated the need to drill down as straight as possible. “It’s much easier to cut through when drilling straight,” he said.
How do you cut ice cubes?
Cut from the center Using your ice pick to hold the ice in place, use your knife to gently saw a line across the center of the block ice. If your ice is rectangular, you should saw widthwise; if your ice is square, saw a line across the middle. Essentially you’re marking the ice in order to cut it cleanly in half.
What bait do you use for ice fishing?
For ice fishing live bait, try wax worms (bee moth larva), maggots, spikes (fly larvae), wigglers (mayfly larvae) or minnows. You can drop your bait and leave it alone, or you can slowly jig to attract the fish. Ice fishing jigging also works with artificial ice fishing bait.
What is a spud bar for ice fishing?
A spud bar is a long piece of steel, generally about 4-5 feet in length with a tapered point at the end. THAT’S IT! To some anglers it’s something they leave out of their vehicle when embarking for the ice as it may be deemed inconvenient and cumbersome.
What can I use instead of an auger?
A spud bar or digging iron will work fine. I made my spud bars out of rebar and a piece of flat steel that I machined and hardened.
What is the number one selling chainsaw?
Stihl 271 Farm Boss Chainsaw STIHL are still the number one selling chainsaw brand in the USA. The Stihl 271 Farm Boss is a great saw for the small farm owner, or if you have a larger section of land with mature trees, and you need a reliable saw that can handle big jobs on a regular basis.