You may think that the best type of wood to use is a hardwood but on the contrary the best kind of wood to use is a softwood. An experienced wood carver will know what wood is best for them and their particular style of chainsaw art! Contact us today to learn more about the chainsaw carvings Clark has to offer! All of Clark’s sculptures and chainsaw art are made from sustainable softwood timber he obtains from tree service companies as well as harvested wood from naturally downed, storm damaged trees.
In general, cedar can be used no matter the type, red cedar is slightly more pleasant specifically to carve with a chainsaw but even that it is not the absolute best wood to use for chainsaw carving but it is among the most common kinds of wood that people use. Of course, all wood has its pros and cons, but from experience, softer wood has a lot more use for chainsaw carvers than harder wood. It’s best you actually get the chance to see and feel the wood before buying it, to avoid some of the potential dangers of chainsaw carving.
As a woodworker, if you have some experience and talent in wood carving, you could give chainsaw carving a shot. In this post, we consider the different types of wood that you can use and those best for chainsaw carving. Relief carving is a specialized form of wood carving where we carve figures and objects from a flat piece of wood.
Keep reading to learn more about choosing the best wood for chainsaw carving and how to identify good quality lumber. The best wood to use when carving with a chainsaw depends on what type of project you’re trying to create, whether you’re carving small decorative pieces or more oversized functional items. The best wood for your chainsaw carving is softwood.
Hi Snyder, This means to never put the bottom of the bar whereas the chain is pulling the dirty wood, bark, rocks, etc into the cut. If the log,wood is dirty remove the bark, dirt, etc. First or just using the tip of the bar cit into the clean top of the log with he tip not extending out enough to drag the dirty wood from the other side of the log into the cut.
best wood for chainsaw sculpture Related Question:
Is oak good for chainsaw carving?
Yes, Oak is good for carving. Oak is a popular ideal wood for carving because of its great properties. Because of being strong and sturdy Oak wood carvings has long-term durability.
Can you use pine for chainsaw carving?
Pine can be carved but there are a few things to look out for. A Clean piece of White Pine is generally best for carving. It is also very easy to machine and one of the best woods for chainsaw carving.
What kind of wood do wood carvers use?
Each wood type is ideal for a different project, as they all feature different characteristics. For beginning woodcarvers, a softer wood like basswood is a wise choice. For more projects that require more durability, however, you can’t go wrong with hardwoods such as oak or walnut.
Is maple good for chainsaw carving?
Maple wood is excellent for chainsaw carving. With a chainsaw, you don’t need to worry about tearing up the wood when carving. The grain of the Maple wood makes chainsaw carvings so attractive. So, always make sure to carve along the direction of the wood grain for better results.
What wood is the easiest to carve?
The Easiest Wood To Carve- Basswood The most popular and universally used wood for carving is Basswood. The softness of Basswood is enough to make carving fairly easy, while emphasizing the fine details well thanks to the small grain knots.
Is Cedar good for carving?
Cedar wood is very good for carving. Cedar has a different species such as yellow cedar that is smooth and aromatic when carved, red cedar that is more difficult to carve but has a rewarding red color, and white cedar that is suitable for almost all types of carving.
Is birch wood good for carving?
Birch is perhaps my favourite wood to carve. While green, the wood is easy to cut, but close grained enough that when dry it gives a fantastically smooth finish. Here are the steps I went through carving a birch spoon from a half section of a birch limb.
Is Ash a good wood for carving?
Ash is good for carving. Ash is a hard and dense wood with great strength that can use to make beautiful and durable carvings. But the carving tools should be well sharpened because carving Ash wood is difficult because of its high hardness and density. Carving Ash wood needs lots of patience and practice.
Is balsa wood good for carving?
Balsa wood is perfect for beginners who want to start whittling or wood carving as it soft enough to carve with the most basic tools. Carving a softer wood like balsa wood is a great way to build a new carvers confidence and teach them the basics.
Is Black Walnut good for carving?
Yes, absolutely. Black walnut isn’t really all that hard of a wood, comparatively. Looking at Janka hardness testing, black walnut is about 1010 pound-force. By comparison, basswood is about 410 and purpleheart is 1860.
Is Poplar a good wood to carve?
Poplar or yellow poplar or tulip poplar is a hardwood species. It is the softest wood in hardwood. Therefore it makes good wood for carving.
What is the lightest wood for carving?
Balsa wood is perfect for beginners or any other carvers that are looking to try and carve a very soft wood. Balsa carvings are also very light which makes carvings made from balsa wood stand out when picked up.
What is the best UK wood for carving?
Oak is Simon’s number one recommendation for an outside sculpture. It is extremely durable, and in abundance in the UK! In fact, it’s the second most common tree in the country (Birch being most common). It has the bonus of having very defined grain too.
What is the hardest wood to carve?
1. Australian Buloke – 5,060 IBF. An ironwood tree that is native to Australia, this wood comes from a species of tree occurring across most of Eastern and Southern Australia. Known as the hardest wood in the world, this particular type has a Janka hardness of 5,060 lbf.
What kind of wood do you use to carve a spoon?
Best Woods to Get Started With Spoon Carving Willow – easy to carve, common wood. Cherry – a little bit harder but a lovely grain, you can also get two tones. Birch – Himalayan birch is one of my favourites, close grained and easy to carve.