If your chainsaw is smoking from the engine, then your problem is more serious, and has potential to do greater damage to the machine. Alright, now that we’ve covered the 2 groups of things that DO cause chainsaw smoke, I also wanted to mention some things that DO NOT cause chainsaw smoke. The 2 things to look at, when troubleshooting a smoking chainsaw.
There is a distinct difference between a smoking chainsaw chain and a smoking engine. The chainsaw chain is the hardest working component on your chainsaw so it’s no surprise to have it show signs of stress. Your chainsaw smoking when cutting is a sure sign the chain needs a close inspection.
A smoking chainsaw can be worrying whether you’ve just bought a new chainsaw or it starts smoking suddenly after months of trusty service. Sometimes a new chainsaw will begin to smoke before the chainsaw has even had a chance to get broken in, which precludes common smoking causes like clogged air filters or spark arrestors. Keeping a chainsaw from smoking on startup involves generally keeping the chainsaw well-maintained when you’re using it.
how to make chainsaw smoke Related Question:
What makes a chainsaw chain smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Should a chainsaw burn wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Can you burn up a chainsaw chain?
Don’t Refuel Your Chain Saw When It’s Hot Fine. But why burn up a perfectly good chain saw just because you’re too impatient to wait for it to cool off? The heat from a hot engine vaporizes the fuel as you pour it into the tank. If the vapor ignites, you’ll be pouring gasoline right onto the, ah, fire.
What to do if chainsaw is smoking?
An abundance of smoke emanating from the engine often indicates that an excessive amount of oil has been introduced into the oil and gasoline mixture that powers the chain saw. Ensure that you’re mixing the correct amount of oil and gasoline according to the dictates of your owner’s manual.
Why is my chainsaw blowing white?
Why is my chainsaw blowing white? While black smoke is caused by the burning of more fuel than air, blue or white smoke is generally caused by the burning of excess oil.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why does my chainsaw bar get so hot?
If your chainsaw’s blade is overheating and producing smoke, it means that there is a serious problem with it. In that case, you must start troubleshooting at once. The two most common causes of the overheating or smoking of your blade are lack of lubrication of the bar guide or the engine and lack of air.
Is Wet wood easier to cut with a chainsaw?
No, it is not bad to cut the wet wood with your chainsaw. Dewdrops, raindrops, or the snow on the wood will not cause any harm to your chainsaw. It is, in fact, much easier to cut through the wet wood than dry wood because the extra moisture on the wood will act as a natural lubricant.
Is Wet wood harder to cut?
Wet Wood Vs Dry Wood But wet wood is actually much easier to cut than dry wood. With dry wood lacking moisture content, more friction is created as the chainsaw chain comes into contact with the wood fibers. This friction results in the chain slowing down.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
Will burnt wood dull a chainsaw?
Cutting burned trees is extremely demanding on a chain saw. It is very abrasive and fine particles. Check the air filter often. It will need cleaning or replacing on a regular basis.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How long should chainsaw blades last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Why does my chainsaw cut curves?
Two main reasons will cause the chain to cut on a curve. The most common reason is from improper hand filing. If one side of the teeth is more heavily damaged, sharpening them down will make them smaller than the other side.