His instructor told him that it’s illegal for anyone to use a top handle chainsaw on the ground and for example, said that if I do I can be fined heavily. I’ve found myself using the top handle alot for small jobs – I guess I’ll have to decide for myself how much of an increased risk I’m taking, and whether it’s worth investing in a small/lightweight rear handle saw. It is illegal for a dealer to sell a top handle saw to anyone not able to produce their certificates as an arborist. As far as I’m aware, it is not illegal to sell a top handle saw to someone without the tickets, I was under the impression that it was just Stihl/Husqvarna policy, along with not selling on the internet. These saws are also being used by people that I would class as inexperienced, quite often casual labour, and not smart casual labour by any means… If you get kickback on a top handle when using it in front of your face is that the saw’s fault? I think not…. I believe this “use only in the tree” claptrap is coming from certain qualified arborists who like to put tickets on themselves thinking that nobody else has the expertise to use a top handled saw safely. These saws are also being used by people that I would class as inexperienced, quite often casual labour, and not smart casual labour by any means…If you get kickback on a top handle when using it in front of your face is that the saw’s fault? I think not…. :agree2: On what concerns my limited experience, I do not work on almonds but on citrus and the “picture” is the same as MCW referred. If accidents with top handle saws would be so catastrophic as UK authorities want to project it, we would run out of chainsaw operators very soon…. Last edited: Oct 19, 2010.
The worker closest to the camera is using a compact designed saw commonly known as the top handle or top handle chainsaw for delimbing debris on the ground in a tree removal operation. The investigation started at our safety meeting with an open discussion about the safe use of chainsaws and then moved on to discuss the specific safety requirements around the top handle chainsaw. I have just read your article about how you responded to criticism regards top handle chainsaw use on the ground.
The design of the top-handled chain saw makes it possible, and extremely tempting, to operate with only one hand to control the saw and throttle simultaneously. Rotational kickback occurs when the upper quadrant of the chain saw bar tip comes into contact with wood or other matter, causing the top of the chain saw bar to jolt suddenly toward the operator at very high speeds. The operatorshalloperate the chain saw with the left hand and thumb gripped firmly around the forward handle and the right handand thumb gripped firmly around the rear handle, unless it is not practicable, and theemployer demonstrates that a greater hazard is posed by operating the chain saw that way in that particular situation.
top handle chainsaw law Related Question:
Can I use a top handle chainsaw?
Top-handled chainsaws are only suitable for use off the ground. Operators must use rear-handled saws when working on the ground.
What is a top handle chainsaw for?
What is a Top Handle Chainsaw for? Top handle chainsaws are designed to be operated off the ground, even with a single hand. They are more suited for professional arborists for pruning down branches while climbing a tree. In a top handle chainsaw, all the necessary controls are mounted near the top handle.
Can you use a top handle chainsaw one-handed?
Top-handled chainsaws should not be used one-handed either in place of poor work positioning or in preference to a handsaw whilst cutting smaller material at branch tips.
What is an arborist chainsaw?
Arborist chainsaws are essential power tools to climb a tree and prune overgrown branches, or even cut damaged ones due to their lightweight design. The best arborist chainsaw goes beyond this, they’re also easy to maneuver with only one hand.
Can you use a chainsaw one handed?
One-handed use can result in the operator having less control over the chainsaw. In one-handed use the saw may skate, bounce or kick back on contact with the material being cut, or may come into contact with the operator’s free hand/arm if used incorrectly.
What is the lightest gas chainsaw?
The X Series ECHO chainsaw CS-2511T 12 in. is the lightest gas powered chainsaw in North America. The 25.0 cc professional-grade engine delivers incredible horse power from a compact, easily maneuverable body.
What is a pruning saw?
Definition of pruning saw : a saw that has a usually tapering straight or curved blade and either a closed or an open and sometimes folding handhold and that may or may not be attached to a pole.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Can a chainsaw cut through bone?
Bones may be slightly tougher, but they are rigid and a chainsaw will likely be able to cut through them without much problem – though it will probably dull the blade more than wood.
What does MS mean on Stihl chainsaws?
Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.
Is Echo as good as Stihl?
Conclusion. Echo and Stihl are both options. If you want a powerful and lightweight chainsaw, then an Echo model might be the right choice for you. Stihl makes more sense if you are after a well-built, durable, full of extra features, fuel-efficient chainsaw.
How thick can a pruning saw cut?
Pruning saws are your choice for wood about 1.5 inches thick or more and your last resort before the very large stuff that you might only be able to do with a chainsaw. As such, they are used to cut a wide range on the large end of wood thicknesses.
What is the best tool to cut tree branches?
For the cleanest cuts, choose bypass pruners, which cut like a pair of scissors, with a curved cutting blade that slides past a lower broad blade. Also called lopping shears, a lopper is the tool of choice for cutting branches 2 inches in diameter. The lopper label should specify the branch size it will cut.