There’s no doubt that both the reciprocating saw and the chainsaw are capable when it comes to cutting up wood with ease. A reciprocating saw will usually only cost you between $80 and $200. On the other hand, even a cheap chainsaw will often come with a $180 or higher price tag. At first glance, you might assume that a reciprocating saw and a chainsaw are suitable for completing similar cutting tasks.
Maintaining the electric chainsaw is more complicated than the reciprocating saw. The simplicity of the reciprocating saw allows for just sharpening but on the other hand, the electric chainsaw requires regular maintenance-the change of oil, sharpening of the blade, cleaning of the bar, etc. Below, we give you a full breakdown of the advantages the reciprocating saw has over the electric saw.
The chainsaw is a lot more work to maintain than the reciprocating saw. As with a chainsaw the reciprocating saw needs to be sharpened, as using it on trees can dull the blades. If it’s a thin tree you need to cut, or if you need to cut off branches from time to time, then pick up the smaller, lighter reciprocating saw.
The Reciprocating Saw Another name for the reciprocating saw is the recip saw, or saber saw. Major Differences between the reciprocating saw and the chainsaw The following are factors that differentiate both saws from each other. The reciprocating saw which has a smaller blade and motor is less noisy when actively cutting into a block of wood than the chain saw which produces more noise.
reciprocating saw vs chainsaw for pruning Related Question:
Can a reciprocating saw be used for pruning?
Reciprocating saws can be used to handle a variety of pruning tasks, from cutting down tree branches to trimming hedges and cutting back vines. They are much easier to use than pruning shears since it requires less manual labor, but because it is a power tool, it must be used carefully to avoid injuries.
Are reciprocating saws safer than chainsaws?
What is this? While the electric chainsaw is perfect for cutting bigger trees, the reciprocating saws are ideal for smaller trees. Reciprocating saws are, however, less risky to handle as the power goes off immediately you remove your hands from the power button.
Is a reciprocating saw good for cutting tree roots?
The saws use blades rated for cutting through wood and even nails, so they are sturdy enough to cut roots. You can use a reciprocating saw to slice through roots if you are trying to dig out an old tree or shrub. The saw will even be sharp enough to cut through the soil, if your soil is not rocky.
How thick of a branch can a reciprocating saw cut?
Q: How much thickness of tree branches can be dealt with a reciprocating saw? Ans: The answer is not something specific. But usually, three branches of up to 12 inches of diameter are good to go.
Can you cut wet wood with a reciprocating saw?
You can cut small trees with a reciprocating saw, and by small trees, we mean those around 5 inches in diameter at the most. To cut into wet, green lumber, you will need a pruning blade that will not get caught in the fresh fibers of the tree.
What’s better than a chainsaw?
A bow saw can handle many of the same cuts while saving wear and tear on a chain saw. Bow saws are capable of handling up to about a 10- to 12-inch tree, and replaceable blades mean that there’s nothing to sharpen. Look for a minimum 24-inch blade—smaller ones are suitable only for small branches—or even 30-inch.
Does Stihl make a reciprocating saw?
And for now, it’s one of the only battery-powered models we’re aware of that you can get in the US. However, a one-hand reciprocating saw with a pruning blade, though it has more vibration, might be more productive in terms of its cutting speed, capacity, and runtime.
What is the best tool for cutting tree roots?
Root Removal With Nonpowered Tools Mr. Tree Services experts say that gardening shears can work well. Alternatively, you might use a shovel or spade, branch cutters or loppers, a mattock or hoe to dig out the soil, and an axe or even a saw.
How do you cut thick tree roots?
Try to cut far from the root ball. Next, use the grub hoe to lift out the cut roots. Pull additional ones out by hand if you can. Push the stump back and forth to loosen the roots and continue to cut and pull roots until you are able to remove the root ball from the soil.
Is reciprocating saw good for cutting branches?
Use your reciprocating saw to prune small trees and branches. Reciprocating saws are great for trimming/pruning small trees and branches. Make sure you stick to the safety rules; wear eye protection, have solid footing, etc… Be reasonable about the size of the branch you decide to cut.
What is the best saw choice for cutting and pruning trees?
Curved or straight: A pruning saw with a straight blade is well suited for making cuts in the vicinity of the user’s torso or waist because that’s where the user is able to generate the most power. Curved blades are better suited to making overhead or low cuts because the curved blade helps hold the saw in place.
What do you use to cut thick tree branches?
A chainsaw provides the cleanest cut when you’re dealing with limbs thicker than 3 inches. If your pruning job requires a chainsaw, it’s recommended that you contact a certified arborist. A pole pruner allows you to cut branches that are beyond your reach. Most pole pruners cut limbs up to 2 inches in diameter.
How thick can a pruning saw cut?
Pruning saws are your choice for wood about 1.5 inches thick or more and your last resort before the very large stuff that you might only be able to do with a chainsaw. As such, they are used to cut a wide range on the large end of wood thicknesses.
Can you cut a straight line with a reciprocating saw?
The reciprocating saw can be effectively used to cut the wood into a straight line. By choosing the right blade and the correct technique, you will no longer have to wonder about how to use a reciprocating saw to cut wood straight.
Can reciprocating saw cut 4×4?
Most reciprocating saw blades range from 3 to 12 inches, meaning they have plenty of length to handle the 3.5-inch thickness of a 4×4 post. The design of a reciprocating saw also makes them ideal for cutting through fence posts that are already in the ground.