When you’re planning on felling a tree, you can estimate where a tree will fall by using the “Ax handle trick.” This is how to fell a tree in the direction you want: hold an ax handle at arm’s length, close one eye, and back away from or move toward the tree until the top of the ax is even with the treetop and the bottom is even with the base. Wedges will keep the saw from getting pinched in the cut if the tree leans back. The instant the tree begins leaning, pull the saw free, set the chain brake and walk away along one of your escape routes, keeping an eye on the tree so you can react if it doesn’t fall the way you planned.
You want to cut down a tree and Paul Bunyon isn’t available to help. If you’re reading this guide, you’re probably looking to cut down a tree a bit bigger than the struggling fruit tree you planted three years ago. How to cut down a tree with a chainsaw / Amada44 / CC BY-SA. 6.
how to chainsaw a tree down Related Question:
What angle do you cut a tree down?
Cut the Notch Start with the top cut, moving at about a 45-degree angle downward. Cut about 1/3 of the way into the trunk. Below that, make a second cut parallel to the ground. This horizontal cut should come pretty close to meeting the first cut.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
How do you cut a tree with a hand saw?
Trim branches and limbs that will make cutting the tree down easier, or could prove dangerous during your work. Use your handsaw and make a cut on one side of the branch, cutting about a third of the way through. Switch to the other side and continue cutting until the branch falls off.
Which way will a tree fall in a storm?
A tree will most likely fall in the direction of the lean.
What side of the tree do you make the first cut?
Start Cutting Branches at the Trunk Work from the left side of the trunk (as you face toward the top of the tree). This allows the safest and most efficient use of the chain saw because you can rest the side or bottom of the saw on the trunk and slice off the branches with a pivoting motion.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
How do you cut down a tree with an axe?
Chopping With An Axe: If you’re using an axe, then start with a 45 degree angle chop (to create a notch) on the side that you plan for the tree to call. Continue to chop in 45 degree angle chops, with each chop opposite each other. Continue this until you’re about a third of the way through the tree.
Should I cut down tree close to house?
Typically, you do not want trees too close to your home because they can trigger many types of damage that can be pretty devastating. While trees may provide some shade for your home that can help control its temperature (in both winter and summer), trees can also cause: Severe foundation damage due to their roots.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can you use a chainsaw to cut tree roots?
Once you’ve sliced the stump almost all the way to the ground, continue cutting it — and the soil — diagonally and at different angles. Don’t go more than a foot into the soil. Chainsaws are powerful machines, and you don’t have to worry about dirt damaging it or knocking the chain off.
Can you cut a tree down with a saw?
Although many people use powered chain saws that cut through the trunk, these are heavy and difficult to use for those without prior experience or proper skill. You can use a hand saw to cut through the trunks of smaller trees. Follow all safety procedures to prevent any injury while felling trees.
Can a hand saw cut a tree?
This is where a hand saw can come in handy. These are smaller pieces of equipment that will be very useful for cutting down small trees or branches in your backyard. Hand saws typically feature smaller, safer blades than an unwieldy chainsaw, so should give you more peace of mind.
How much wind is needed to uproot a tree?
– at 47 to 54 mph, there will be light structural damage. – at 55 to 63 mph, entire trees can be uprooted and considerable structural damage can occur. – above 64 mph, expect widespread structural damage.