It would be very rare for me to need to cut down a large tree. You can make your initial cuts, let the tree fall, and then cut down the remaining bit to a stump. A few inches above the first horizontal cut and on the opposite side of the tree, make another slice with the chainsaw but don’t cut all the way to the other cut lines.
This page was designed as a quick study guide for the casual user and does not substitute for the owner’s manual or a chainsaw safety class. The Rule of Fives, developed by foresters and professional loggers, reminds the user that there are five stages to safely cutting down a small tree: 1) personal protection, 2) saw safety check, 3) know your surroundings, 4) the felling plan and 5) the stump plan. Get a good night’s rest and eat a healthy breakfast to help you stay alert.
If you want to cut the tree in the opposite direction of it’s lean, or you feel unsure about cutting down the tree by yourself, call a professional. Second, choose a chainsaw that is appropriate for the tree you want to cut down. Don’t try to cut down a large tree with a small chainsaw.
Using a chainsaw to cut down a tree of small height or a leaning tree is quite effective. A tree of small size can be cut down in minutes with a chainsaw whereas it may take several hours [or days] to chop the tree down using axes, saws, or other manual tools. After reading this article, you should have more knowledge about using a chainsaw to cut down small trees and pick out the best chainsaw for small trees.
how to chainsaw a small tree Related Question:
Can I cut down a small tree myself?
Can I safely cut down a small tree? If the tree is small enough that you could remove it without climbing a ladder, it’s likely OK if you remove it yourself. If you have any doubts about whether it’s safe to remove the tree on your own, contact an arborist, and they’ll provide guidance.
How do you hand saw a small tree?
Cut a horizontal cut low on the “front” of the tree, going through about 40 percent of the tree’s thickness. Work the saw back and forth to create the cut, applying firm and steady pressure. Make another cut just above the first, coming down at an angle so the two cuts meet like a piece of pie removed from the rest.
What kind of saw do I need to cut down a small tree?
For the typical small tree (less than a six-inch stem), a one-hand bow saw does the trick. It’s also great for sawing up fallen branches for disposal during spring cleanup.
Can I use a pole saw to cut down a tree?
Pole saws are great for trimming tree limbs and branches that are hard to reach. So instead of using a ladder, getting a good pole saw is a better idea. Just like the chainsaw, pole saws come in different types – manual, electric, and gas-powered pole saws. A gas-powered pole saw is like a chainsaw with an extension.
Can reciprocating saw cut trees?
Use your reciprocating saw to prune small trees and branches. Reciprocating saws are great for trimming/pruning small trees and branches. Make sure you stick to the safety rules; wear eye protection, have solid footing, etc… Be reasonable about the size of the branch you decide to cut.
How do you cut a small tree with an axe?
Chopping With An Axe: If you’re using an axe, then start with a 45 degree angle chop (to create a notch) on the side that you plan for the tree to call. Continue to chop in 45 degree angle chops, with each chop opposite each other. Continue this until you’re about a third of the way through the tree.
What is the difference between topping and pollarding?
The major difference between the two words: Whereas the former is done with design in mind, the latter is done out of expediency. More thought and planning goes into pollarding, which is considered an art form, much like topiary. Topping means cutting older trees down almost to the top of the trunk.
Which way will a tree fall when cut?
Plan the Notch The notch is what will allow the tree to fall properly, so you want it on the “fall side” so the tree will fall in the direction of the notch. The fall side should be the heaviest side of the tree. Cut at a comfortable working height.
How much of a tree can you cut without killing it?
As a general rule, don’t prune off more than 15% of the foliage. If you must make space for other plants, it is a better idea to remove a tree completely than to risk over-pruning it.
How do you get rid of small tree stumps?
Dig around the stump, exposing as many roots as possible. Use a chainsaw, hatchet, or handsaw to cut the larger roots. As you continue digging, you may find smaller roots that can be cut with clippers or loppers. Once you’ve cut all of the roots around the stump, lift and remove the stump from the ground.
What is the easiest way to get rid of a tree stump?
Pour 3 to 4 ounces of tree stump removal chemicals into each of the holes in granule form, then fill the holes with water so the chemicals can soak in. Wait 4 to 6 weeks for the chemicals to accelerate the rotting process in the stump. You’ll know this has happened when the stump becomes soft and spongey.