XTo sharpen a dull chainsaw, clamp the bar of the chainsaw to your work station and tighten the chain using the tension adjusting screw to make sure it won’t move. Use a permanent marker to draw a line on the link where you’re going to start filing, and get a specialty chainsaw file that’s the same diameter as the chainsaw teeth. To file, hold the file between the teeth at a 30 degree angle, and slide it across the face of the cutter 3-10 times until it is sharp.
Since saw chains have cutters that alternate orientation along the chain, you need to use a chainsaw sharpener on all cutters on one side, then swivel the chain holder and tackle those pointing the other way. An electric chainsaw sharpener is ideal for this kind of periodic chain maintenance, though you will need to change the abrasive wheel to an extra-wide version made for this work. No matter how you use a chainsaw sharpener, it makes sense to keep an extra chain or two on hand, sharp and ready to go as you’re working in the forest.
Of course, STIHL Approved Dealers will always be happy to sharpen a chainsaw chain for you and if the chain is damaged at all, then replacing the chain or the damaged cutting teeth, is the best course of action, so again, just pop into your nearest STIHL Approved Dealer. It’s really important to make sure the depth gauge is filed too, as it is the difference between the height of the cutting teeth and the depth gauge which determines how much wood is taken out by the chain. If you are working with a battery or electric chainsaw, make sure you remove the battery or unplug it before sharpening so it can’t be accidentally started, then release the chain brake so you can move the chain freely.
File Sharpening Using a file to hand sharpen a dull saw chain might seem like a very slow way to go. Bench-Top Sharpeners If you use a chainsaw all year-round or if you own more than one chainsaw, then you can save a significant amount of time and energy by sharpening the saw chains with a bench-mounted sharpener. A bench-top sharpener is certainly the quickest, most accurate way to sharpen a saw chain, but just as importantly it makes it nearly impossible to ruin a saw chain by grinding away too much material.
how to sharpen chainsaw chain Related Question:
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How often should you sharpen the chain on your chainsaw?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
How much does it cost to sharpen chainsaw chain?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.
Is it better to sharpen chainsaw chain or buy new?
Sharpen before replacing If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. This is why, where possible, you should be looking to keep the will be chain sharp, as sharpening a better course of action than sourcing a replacement.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
What will dull a chainsaw blade?
The dirt and mud can be a factor that will cause your blade to dull. Whenever you’re cutting dirty wood, it might be appropriate to expect the chainsaw blade to dull a bit faster than usual. You can be ready to sharpen the blade after finishing and you won’t be surprised.
Does Ace Hardware sharpen chainsaw chains?
Our experienced professionals will machine sharpen your chain saw for pitch-perfect cutting edges: tooth-after-tooth. Bring your chain saw into Steadman’s Ace Hardware and let one of the friendly, experienced mechanics give it a tune up.
Do chainsaw chains come pre sharpened?
Yes, the chains of the chainsaw come sharpened from the factory when you buy a new one. There is no need to sharpen it before your first job.
How long should chainsaw last?
That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.
How long does a new chainsaw chain last?
The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
What kind of file do you use to sharpen a chainsaw?
While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening. There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.