On a 16″ bar and cutting the type of wood you stated, I would stick with what you have. You could switch from.325 pitch to 3/8″ pitch low profile chain in a 0.050 gauge to give you a narrower kerf and a few less cutters per loop. This would reduce the power required in the cut, but would require higher rpms to keep the cutting speed at an acceptable rate.
Chain saw chains are rated by their “Safety”, or aggresive nature. To understand how these chains work, lets first review how a standard saw chain cuts wood fiber. If you take your saw to the dealer for sharpening anyway, this isnt a problem, but if you sharpen the saw yourself and end up not keeping the chain suitably sharp, youll end up introducing a new risk factor pressing down too hard on the saw in frustration which can nullify the advantage of the safety chain in the first place.
I’ve resharpened the chain & with my smoother looking grind it still cuts better then a Stihl chain. For the same price of regular round ground chain buy square ground chisel bit chain like the Oregon 72-73-75CL, CJ or CK which already has a 15 angle. Stihl makes a comparable chain called a 33-36 RSLK. Superior cutting chain in all 3 cutting angles in wood grain.
I have some long ago notes when I researched this nearly 10 years ago. Here’s what I wrote down over 10 years ago in my little notebook. I didn’t get my 18″ one used till a couple of years ago.
best chainsaw chain for stihl ms250 Related Question:
What is the most aggressive chain for a Stihl chainsaw?
404″ chainsaw pitch is the most aggressive chainsaw chain pitch for professional arborists.
What size file does a STIHL MS250 use?
Answer: My MS250 came with a . 325 chain which is a 3/16″ round file. You will need the sharpener for that one.
Can you put a 20 bar on a MS250?
Homeowner Chain Saws Stihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches. The MS 250 and MS 251 models are equipped with larger 45 cc engines and are capable of driving an 18-inch bar.
What chain do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Are STIHL chains better than Oregon?
Stihl chain hold their edge a bit longer than Oregon, but they also slightly harder to file. It is hardly noticable during normal maintnance (touch up before it gets dull), but obvious during more extended filing. I prefer Stihl when I have the option.
What is the fastest cutting chainsaw chain?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
What is a STIHL 311y?
The MS 311 is a high-tech workhorse with a step up in horsepower and features over the MS 291. With our improved engine technology, you get higher fuel economy for longer run times. The MS 311 also has larger fuel and oil tanks for even longer extended use. You’ll stay productive – while you’re saving money on fuel.
Will an Oregon chain fit a Stihl?
Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .
What angle should I sharpen my STIHL chainsaw chain?
STIHL saw chains are generally filed to an angle of 30° – parallel to the service mark for the filing angle. Hold the file so that one quarter of its diameter projects above the top plate.
What is the correct file size for .325 STIHL chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
What size file do I need for a STIHL .325 chain?
325 chain size, 3/16″ file size.
Can you put a longer bar on a Stihl MS 250?
Stihl does not make 3005 mount bars in anything longer than 18″/68DL (. 325″) or 18″/61DL(3/8″P). The 3003 mount bars from the MS260/270/280/290 will not fit on a 250.
How many cc is a Stihl MS 250?
Get more done with this compact STIHL® MS 250 High Performance Compact Chain Saw. This chainsaw has an exceptional power-to-weight ratio, so you get great bang for the buck. Specifications: Displacement: 45.4 cc (2.77 cu.