It’s often best to use the undercutting chainsaw technique to reduce the chances of the chainsaw getting pinched or stuck during a cut. A word of caution when using the cross cutting chainsaw method: the chainsaw will try to push back at you. By using these proper chainsaw cutting techniques, you should be able to take care of most common tree cutting jobs.
Use the undercutting chainsaw technique is also the safest way to reduce the chances that the chainsaw may get pinched or stuck during a cut. Any of the mentioned proper chainsaw techniques can be used to perform a cut with a chainsaw. Most of the proper chainsaw techniques require using both over-bucking and under-bucking techniques.
Below are the different chainsaw cutting techniques you can use to cut down the trees effectively,. The technique prevents the chainsaw from getting pinched when you are cutting the log. Safety is the first thing that should come to your mind while cutting wood using a chainsaw.
Do it the right way and prevent chainsaw injuries and chainsaw cuts. Cut with the top or bottom of the bar and chain, but avoid the kickback zone Kickback zone on a chainsaw. Chainsaw Cuts: Cutting the Tree Trunk Photo 4: Start cutting downward in the trunk.
best chainsaw cutting techniques Related Question:
How do you hold a chainsaw when cutting horizontally?
Keep the tool steady. You need to make horizontal cuts, and it needs to be done close to the ground. You should use a wedge to maintain a gap between the wood’s underside and top layers. This will keep your chainsaw from getting pinched.
How do you cut a log without pinching it?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
How do most chainsaw accidents happen?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can you cut with both sides of a chainsaw?
A chainsaw is one of the most versatile tools you can own, but it cuts both wood and flesh equally well.
Why is my chainsaw cutting to the right?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
What is the most powerful chainsaw in the world?
The new STIHL MS 881 is the world’s most powerful chainsaw in production today. Following on from the highly regarded MS 880 chainsaw, which was a favourite of foresters, the arboriculture industry and saw-mill operatives, the MS 881 was designed with the largest timber jobs in mind.
How long should chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
Can a chainsaw run backwards?
If you lugged the engine to a near stall and then released the load, they would start backwards.
Why does my chainsaw cut better on top of the bar?
Using upside down chainsaw bars from time to time keeps your cuts more efficient and accurate. As a bar wears out, it won’t hold a chain in place as well, and the chain will move laterally more easily. This reduces a chainsaw’s ability to cut accurately.
Can you use a chainsaw to cut tree roots?
Once you’ve sliced the stump almost all the way to the ground, continue cutting it — and the soil — diagonally and at different angles. Don’t go more than a foot into the soil. Chainsaws are powerful machines, and you don’t have to worry about dirt damaging it or knocking the chain off.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.