Ice chain saw is mainly used to cut dense layers of ice either to cut the layer into big blocks or to make holes into the ice for fishing. Though a chain saw is used to cut or pierce large ice layers, a hand saw might be necessary to cut the required opening for the chain saw to work. Whether you are cutting larger blocks of ice into smaller pieces or spearing holes into ice for fishing, only the best saw for cutting ice should be your choice.
When you running your saw on the ice for the first time of the season, do a bunch of cutting before you get to your spot. That will flush and clean out your “Ice saw” so when you actually get to your spot you hole is nice and clean with no oil slick…. I screw in a T ice anchor before cutting as an aid to lift the block up and out before cutting… Make your cuts at a slight angle so your block can only come out one way. Ever since I bought my ice saw I have never needed the chainsaw for cutting a spear hole.
I use full comp chisel chain as long as the ice is clean no problem. To those worried about me using a chain saw on a lake I have been using nothing but pure Canola now for years be it wood or ice! But you don’t need bar lube for cutting ice the water will keep everything cool and lubricated Ice is very easy to cut and cleans your saw up too.
“After starting a hole in the ice with your spud, you must switch to your chainsaw and angle its blade as you cut. To cut a straight line in the ice, you should keep the blade of your chainsaw at a forty-five degree to a sixty degrees angle, not straight upward and downward, and make the cuts in ice as you push its blade into the ice, not while you draw it backward,” Thompson said. The lessons learned over the years with my chainsaw include; before shutting the chainsaw off, I always walk a distance away from the group of my students and rev the chainsaw up to clear any water, then it is shut off and place up off the ice. “My chainsaw is more than thirty years old and, now I am using it on ice only. It looks and runs like a brand new one. Check the length of the board, its appropriate distance, and then use the chainsaw to cut another hole in the ice ahead of the board. If you notice sawdust on the ice, you should stop immediately as the board is being cut, so you should quickly move further away.”
best chainsaw for cutting ice Related Question:
Can I use a chainsaw to cut through ice?
Yes, you can cut ice with your chainsaw. You don’t have to apply any mineral oil to prevent the water from pollution. To prevent the blade from rusting, you will have to look after your chainsaw.
Can you use an electric chainsaw to cut ice?
Electric chainsaw is not much more than a glorified limb trimmer. It will cut thicker ice but it will be slow and I guarantee the entire time you will be wondering why you didn’t just buy a gas powered saw.
How do you cut ice?
“Ice fishing can be kept simple,” says Thielen. “You need a good six-inch hand auger like a Strikemaster Lazer auger, until the ice hits eight inches thick.” Thielen repeated the need to drill down as straight as possible. “It’s much easier to cut through when drilling straight,” he said.
How do you cut ice on a lake?
Try using a spud bar or digging iron Like the axe, you will be chipping out the ice to make a hole. 12 inches of ice would be the max thickness to try this on, otherwise it just takes too long. Always start the hole bigger than the final size you want.
Can chainsaws cut in water?
No, you can not run a chainsaw in the water. You can work in the rain and wetlands, but you cannot submerge a regular chainsaw underwater to cut anything under the water surface. If you submerge a gas-powered chainsaw underwater, the water will get into the engine and ruin your chainsaw.
What can I use instead of an auger?
A spud bar or digging iron will work fine. I made my spud bars out of rebar and a piece of flat steel that I machined and hardened.
How do you break ice for fishing?
Plant twig, rod, or tip-up firmly in the snow with tip centered directly over hole so line is not rubbing on ice which can cause wearing. You can attach a little bell to alert nibbling or watch the flag on your tip-up for action. When a fish strikes, you get your chance at catching.
What is a spud bar for ice fishing?
A spud bar is a long piece of steel, generally about 4-5 feet in length with a tapered point at the end. THAT’S IT! To some anglers it’s something they leave out of their vehicle when embarking for the ice as it may be deemed inconvenient and cumbersome.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
How was a chainsaw used in childbirth?
Two doctors invented the chainsaw in 1780 to make the removal of pelvic bone easier and less time-consuming during childbirth. It was powered by a hand crank and looked like a modern-day kitchen knife with little teeth on a chain that wound in an oval.
Will rain hurt a chainsaw?
Yes, you can. The pouring rain will not damage your chainsaw, and you can perfectly continue working on your project. Just make sure the engine is not submerged in water. So, if you were thinking about postponing your woodcutting plans due to rain or snow, now you know there is no harm.
Is it OK to leave a chainsaw in the rain?
It is not recommended to leave a chainsaw in the rain. Chainsaws are designed with moving parts that can rust and corrode when they come into contact with moisture. This means that if your chainsaw is exposed to rain, you may need to have it serviced or replaced sooner than expected.
Will wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
What is a ripping chain for a chainsaw?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Does a ripping chain cut faster?
The teeth on most crosscut chains are sharpened at 35 degrees, while ripping chain teeth are commonly sharpened at 10 degrees, which makes for much faster and more efficient cutting, especially for milling work.