Power tools like high-end chainsaws can be quite expensive, especially ones that can handle the hard work of milling lumber. If you’re looking for a more affordable option that can still handle the job, then we think we’ve found the best chainsaw for milling lumber for the money. Our pick for the best chainsaws for milling lumber overall was the Husqvarna 460 Rancher Gas Chainsaw.
Having a dedicated chainsaw for milling purposes would provide ultimate convenience to handle lumber. We outlined already how a chainsaw offers convenience and helps immensely in cutting down the costs associated with lumber milling. If you are still confused, then go with our suggestion of choosing Echo CS-590 Timber Wolf as it’s indeed the best chainsaw for milling available in 2022 that features a powerful 59.8cc gas engine along with an extra sharp bar and chain.
Choosing the best chainsaw for milling your own lumber will really come down to how large of trees you’ll be working with. If you’re clicking on links that take you to a big box lumber store or Amazon, then you’re not going to be buying a chainsaw capable of milling lumber. Almost anyone who has spent a decent amount of time milling their own logs will quickly tell you that this is the saw you should go with from day one if you’ll be milling with any consistency.
We have the best chainsaw for alaskan mill right here in our article. Any size of chainsaw will work on the Alaskan mill but you have ensured that they are at least more than 5 inches. At the end of the day, it’s really up to you, and what you want to call the best chainsaw for Alaskan mill.
Finding the best chainsaw for milling presents a few challenges. There are several features to look for when choosing the best chainsaw for milling. A chainsaw mill, on the other hand, uses a chainsaw to cut inside of a mini mill.
best chainsaw to use for milling Related Question:
What size chainsaw is needed for milling?
What you need is a chainsaw powerful enough to get the job done with a chainsaw mill. You will want to have a saw that has at least a 50cc displacement and can run a 20-inch chain. However, if you’re cutting smaller logs and milling smaller boards, you can use a smaller saw.
Is chainsaw milling worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
Can you mill with a 460 rancher?
As I’ve stated before, milling is the toughest task you will put your chainsaw through and having that power is great. But the Husqvarna 460 rancher also has its strong points, and one of the biggest is it won’t wreck your wallet.
Can you mill with a 60cc chainsaw?
Re: Husqvarna ChainSaws A 24″ bar is too much for a 60cc saw crosscutting, never mind ripping. Torque and lots of it is required for milling, even with that it is still hard work for the operator and the saw.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
What is a chainsaw ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Do I need a ripping chain?
Do I Need A Ripping Chain? If you are milling and want to have a smooth finish to your cuts, then a Ripping chain provides a huge advantage over a regular x-cutting chain. You should also get some speed advantages in using a Ripping chain.
What’s the difference between a ripping chain and a regular chain?
While most chainsaw chain is designed to cut across the grain of the wood you’re cutting, ripping chain is specially modified to cut along the grain. One of the main differences between ripping chain and crosscut chain is the angle that the teeth are sharpened at.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Can you use a chainsaw on lumber?
Yes, you can use a chainsaw to cut wet wood.
Is milling your own lumber worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
What CC is a Stihl 066?
Engine Specifications The 066 uses a single cylinder two-stroke engine with a displacement of 91.6 cubic centimeters.