More info about chainsaw vs hedge trimmer

Chainsaws are different from hedge trimmers in one key way: how the chain cuts through materials. Hedge trimmers are meant to save time and effort by replacing pruning shears and hand trimmers, whereas chainsaws are made to replace large hand saws. Hedge trimmers are not suitable for cutting down trees or thick branches, and chainsaws are not very effective at cutting very small sticks and the ends of bushes.

Notes: Members cut-off dates are set at the 25th of the month before the month of despatch. If you join us on the 24th September your first issue will be the issue due the following month ie. If you join us on the 26th September then your first issue will be the issue due in December.

You can use a chainsaw to trim a hedge and it will make quickly cut through shrubs and hedge plants. Hedge trimmers are lighter than chainsaws and their cutting blades are thinner, which gives you better precision in making cuts along surfaces, such as trimming a hedge with straight lines. I have a thorough explanation of when to trim your hedge here, but you will want to prune your hedge in Winter to direct the next year’s growth, and then trim once or twice over the Summer.

chainsaw vs hedge trimmer Related Question:

Can I use a chainsaw as a hedge trimmer?

A chainsaw can be used to trim bushes, hedges and shrubs. While not as effective as a hedge trimmer, a chainsaw can cut fast enough to trim through lighter woods. However, if you’re looking for those precision cuts, a hedge trimmer will best serve your purposes.

Whats the difference between hedge trimmer and a chainsaw?

The chainsaw is mainly used for chopping large trees, branches and for cutting hard materials. On the other hand, hedge trimmers are designed for shaping shrubs and pruning hedges. A hedge trimmer does its work by cutting off the ends of small branches while a chainsaw pushes the branches aside instead of cutting them.

Can I use hedge trimmer to cut branches?

Hedge trimmers, whether gas, electric or battery powered, are ideal for cutting hedges and thin branches up to about 3/4 inch. Anything bigger than this could snag on the teeth of the trimmer and cause it to seize up, so it’s best to use a more powerful hedge cutter or chainsaw for larger branches.

Can I use a chainsaw to trim a tree?

You can use a chainsaw to trim small branches from a tree, as long as you don’t have to hold the chainsaw higher than shoulder level. To prevent the falling branch from tearing the bark from the trunk as it falls, make a cut a foot or so from the trunk and cut from below the branch, so that the limb sags.

When should you not cut hedges?

We recommend avoiding hedge cutting during the main breeding season for nesting birds, which usually runs throughout March to August each year. This can be weather dependent and some birds may nest outside this period, so it is important to always check carefully for active nests prior to cutting.

What can I use instead of a chainsaw?

A bow saw can handle many of the same cuts while saving wear and tear on a chain saw. Bow saws are capable of handling up to about a 10- to 12-inch tree, and replaceable blades mean that there’s nothing to sharpen. Look for a minimum 24-inch blade—smaller ones are suitable only for small branches—or even 30-inch.

Can a hedge trimmer cut down small trees?

Even the heavy-duty hedge trimmers with wider grooves don’t have the horsepower to cut through tree branches. Fact is, hedge trimmers can’t do the job of more suitable trimming tools like pruning shears or loppers. For the best results, use one of these three essential tools for trimming trees.

How do you cut thick bush branches?

When pruning mature, overgrown shrubs, remove the thickest branches first. Cut them back to the base of the shrub to promote new growth. Hand pruners are useful for smaller branches. Some can handle diameters up to an inch, but long-handled loppers give you leverage to cut branches 1 to 2 inches in diameter.

What to use to cut thick hedges?

Hand shears and loppers can be used for hard-to-reach areas and pronounced angles, or for a more defined finish along the top. Pruning saws are great for making sharp cuts through thicker branches. Tip: See our hedge trimmers buying guide for a more detailed explanation of the options available to you.

How low can you cut with a chainsaw?

Chainsaws are usually only recommended on branches that are 3 inches or more in diameter. Small hand pruners can cut through branches and stems up to 3/4 inches in diameter — common on shrubs — while long-handled loppers handle branches up to 1 3/4 inches across.

Can my Neighbour cut the top of my hedge?

Your neighbour can cut any branches that are overhanging into their garden as long as they only remove the bits on their side of the boundary. If they want you to cut your tree or hedge just because they don’t like the way it looks, it’s up to you whether you do the work.

Can you cut hedges in summer?

In summer, trim side branches lightly to encourage bushing out. In the second year (February to March) cut back growth by half. Throughout the second summer, trim side branches to maintain sides that taper towards the top.

Is it illegal to cut hedges in March?

You should not cut or trim hedges or trees between the dates of March 1st and September 1st without a derogation. You may only apply for a derogation if you plan to cut hedges before any new grass ley or oil seed rape is sown in the Autumn.

Is a pole saw safer than a chainsaw?

Are Pole Saws Safer Than Chainsaws? Both chainsaws and pole saws are very dangerous. They can leave you with serious, life-changing injuries. Chainsaws are more powerful and heavy than engine-powered pole saws.

How safe is a chainsaw?

Chainsaws are potentially dangerous machines which can cause fatal or major injuries if not used correctly. It is essential that anyone who uses a chainsaw at work should have received adequate training and be competent in using a chainsaw for the type of work that they are required to do.

Leave a Reply

Your email address will not be published. Required fields are marked *