Check the Chain Brake When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
The chain brake should be activated when you start the chainsaw. Release the front handle and allow gravity to bring the chainsaw down, rotating around the rear handle, towards the stump. Hold the chainsaw firmly by the front and rear handles.
A good-running chainsaw will start with the chain brake on or off; this means if your chainsaw is in perfect condition, it will start with or without the brake on. The chain brake must be activated when you start your chainsaw – this technique is called “The half throttle pose.” Below are two safe positions to start your chainsaw;. How To Start Your Chainsaw Step One: You stabilize your chainsaw in the process of starting it.
do you start a chainsaw with the brake on Related Question:
Do you start a Stihl chainsaw with the brake on?
On a gas-powered Stihl chainsaw, the chain brake is located just in front of the handlebar. All you have to do to activate it is push it forward. This will keep the chain locked as a safety precaution while you are starting the chainsaw, and until you are ready to use the tool.
Why can’t I start my Stihl chainsaw?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
Can you rev chainsaw with brake on?
Running a chainsaw with the brake on can be dangerous for you and anyone in your vicinity. The chainsaw will not cut, but it still creates sparks that can cause fires or startle nearby pets. It also doesn’t allow the saw to cool down enough which increases the likelihood of overheating and breaking down.
What happens when a chain breaks on a chainsaw?
Ed to answer your question same scenario, chain breaks the drive sprocket instantly disengages from the drive links. Chain stops. No whipping or flailing. Kick backs by far are the greatest danger of chainsaw operation next to struck byes from trees or parts of a tree.
What is the easiest starting chainsaw?
The best gas-powered model, the ECHO 18 in. Gas 2-Stroke Cycle Chainsaw, is easy to start and has impressive cutting power.
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
What does a spark arrestor do on a chainsaw?
The spark arrestor on your chainsaw prevents dangerous hot sparks from igniting fires while you’re working. If the arrestor is clogged or dirty, however, it will also prevent exhaust from leaving the motor, which can prevent it from running.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
Why do chainsaw chain dull so quickly?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
What is the choke position?
The choke is located before the throttle, and manages the total amount of air going into the engine. The choke is only used when starting a cold engine. When doing a cold start, the choke should be closed to limit the amount of air going in.
When should I use choke on my chainsaw?
The choke position is the fourth setting on the master control lever. This setting is used to start the saw when its motor is cold. Stihl chainsaws denote the choke position using a nearly horizontal squiggle between two vertical lines at the lowest position on the master control lever.
Where is the kickback zone on a chainsaw?
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback occurs when the end portion of the nose of the bar (the kickback zone) strikes an object and the chain momentarily snags, or is pinched.
Why is my chainsaw hard to pull and kicks back?
If your chainsaw is hard to pull, here are some common causes: The pully system is snagged or stuck. The starter assembly is stuck or sticky. The housing may be damaged.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.