It’s often best to use the undercutting chainsaw technique to reduce the chances of the chainsaw getting pinched or stuck during a cut. A word of caution when using the cross cutting chainsaw method: the chainsaw will try to push back at you. By using these proper chainsaw cutting techniques, you should be able to take care of most common tree cutting jobs.
Whether you are using a chain saw to cut firewood, trim trees or harvest large timber, you will be performing three basic operations: felling, limbing and bucking. Experienced loggers are often killed by felled trees that hang up or snag in adjacent trees. Proper limbing techniques to reduce damage to the tree are covered in MU Extension publications G5160, Pruning Forest Trees, and G6866, Pruning and Care of Shade Trees.
Learning how to prevent your chainsaw from pinching when you’re cutting firewood is something everyone should understand. There are two easy techniques I like to use to prevent a chainsaw from pinching when the tree or tree top is already on the ground and you’re ready to cut it up into firewood sized pieces. Placing small pieces of firewood under the tree or using wedges are two easy ways to prevent your chainsaw from pinching when you’re cutting up a tree for firewood that’s already on the ground.
Log jaw, cant hook, or a peevie hook gives you the leverage to roll a larger log once you have made your cuts on the top side of the log. I purchased my cant hook at the local Ace Hardware for $60. None of the regular salespeople knew what I was talking about until the old guy in the back came out with one. Turns out he had done quite a bit of logging in his younger days.
how to chainsaw tree on ground Related Question:
Can you cut wood on the ground with a chainsaw?
Cutting a Log on the Ground Technique When a log is on the ground, you can use the overbucking technique to cut it. Here’s how to accomplish that task: Start cutting from the top of the log, applying light pressure to the chainsaw. The chainsaw should do the work, and the teeth should pull the chain bar into the wood.
Can you chainsaw the ground?
Don’t Cut Into Dirt But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
Which way will a tree fall when cut?
Plan the Notch The notch is what will allow the tree to fall properly, so you want it on the “fall side” so the tree will fall in the direction of the notch. The fall side should be the heaviest side of the tree. Cut at a comfortable working height.
Can you dig a trench with a chainsaw?
Yes! Chainsaws are great for digging trenches but there are some downsides so make sure you weigh all of your options before deciding what method will work best for this project.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can I use chainsaw on tree roots?
Once you’ve sliced the stump almost all the way to the ground, continue cutting it — and the soil — diagonally and at different angles. Don’t go more than a foot into the soil. Chainsaws are powerful machines, and you don’t have to worry about dirt damaging it or knocking the chain off.
What should you not do with a chainsaw?
Don’t Cut on the Ground When Using a Chainsaw Cutting on or near the ground puts you at risk for sinking the bar into the dirt. When learning how to use a chainsaw safely, one of the first things you should do is make sure to make your cuts off the ground.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
How do you cut a tree without a pinching saw?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
When should trees be cut down?
If your tree has a less severe problem, one of the best times to remove trees is during the dormant season, between late winter and early spring. Here’s why. Dormant trees are leafless and lighter, so it’s much easier for a certified arborist to cut and handle the branches.
Is it OK to cut branches off trees?
Yes, you can kill a tree by over pruning it. It’s best to start small, and only remove a few branches at a time. Then every year, continue working on it until you reach the desired shape. Also, don’t cut off any large limbs unless they are dead or severely damaged.
How tall of a tree can you cut down?
While many people automatically call an arborist to take down a tall tree, you can cut down your own tall tree with the correct precautions. Call a professional if the tree you wish to cut down has a trunk more than about 16 inches in diameter or if buildings or other obstacles may be hit when it falls.
What is the difference between topping and pollarding?
The major difference between the two words: Whereas the former is done with design in mind, the latter is done out of expediency. More thought and planning goes into pollarding, which is considered an art form, much like topiary. Topping means cutting older trees down almost to the top of the trunk.
Which way will a tree fall in a storm?
A tree will most likely fall in the direction of the lean.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.