There is a process called porting the chainsaw, which helps in achieving a higher compressor ratio within the saw chainsaw. The sole purpose of a wood porting chainsaw is to let it breathe better and make the exhaust system smoother. The process of porting your chainsaw requires prior expertise and experience.
That’s what chainsaw porting means, to increase the power of its engine. Steps in how to port a chainsaw Step one: Open up and make the exhaust larger. There are others methods of chainsaw porting which has the same effect of power increase.
These are the exact steps I follow to wood ports my chainsaws and got 10%-25% power gain. One more thing to add, if you are a homeowner, you might never need to woods port your chainsaw. If you use your chainsaw for milling, read our guide on portable chainsaw mill and chainsaw mill attachment for getting the most out of your chainsaw.
how to porting chainsaw Related Question:
What does porting a chain saw mean?
Porting is altering the size and shape of the ports exhaust, intake and transfer, not necessary all of them though. This affects compression and port timing so it cant really just be done willy nilly ie making them bigger etc.
Can a chainsaw run without a muffler?
A chainsaw will run perfectly without a muffler but using it without the muffler is not recommended for two main reasons. Firstly, the muffler reduces the noise made by the saw, and secondly, it provides protection to the cylinder by keeping debris from getting in.
Can you fix a scored cylinder?
A home user will not be able to fix a scored cylinder with ball hones, nor will any hone they will have. If you can feel a gouge with your finger nail, the cylinder needs to be bored, platted, and polished to its final size before it can be polished.
Can I reuse a scored piston?
There is no problem with a scored piston. Use a not too fine file to clean it up, and use the rings as a tool to clean up the ring grooves.
Can you hone a chrome cylinder?
The only honing that should be done to a chrome cylinder bore is with scotchbrite. You can not bore or hone a chrome bore motor however I do use a fine ball hone to ruff up the glazing as novalves said.
What are chainsaw cylinders made of?
Harder than steel, Silicon Carbide (a very hard ceramic) is dissolved in nickel and then electroplated onto the cylinder bore. This is the process used by Formula One race car engine cylinders. They undergo extreme usage, so you know it’s a process that is good for small engines.
Can you use the tip of a chainsaw?
If you cut with the bottom of the bar, the spinning chain will pull the saw into the log and downward. This is generally the safest way to cut. The most dangerous is to use the tip, which can see the chain’s rotation sending the business end of the saw upwards and directly at your mug.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over. Enter the WORX JawSaw.
How hot do chainsaw Mufflers get?
I’m quite sure a chainsaw muffler will get well over 200 degrees. Even a car muffler, several feet from the engine, gets hot enough to boil water (212 degrees).
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
When did they stop using chainsaws in childbirth?
In light of this success, the chainsaw was eventually mechanized in the later 19th century to increase its ease of use by OB/GYNs on expectant mothers. However, shortly after this, the chainsaw was superseded by the Gigli twisted wire saw, which was most commonly used to cut bone.