Making wood cutting easier, quicker and simply more satisfying, a quality chain saw will cut through the work in next to no time. Check for safety features like an inertia chain brake, side chain tensioning and a chain catcher. Always seek specialist advice when choosing a chain saw.
To help you find the best chainsaw for your budget, I’ll help you figure out how to select the right chainsaw size for your needs. “If most of your chainsaw needs involve pruning small branches or trees with relatively thin branches, a 6″ to 10″ chainsaw is the tool for the job. Cutting down medium size trees with a trunk of about 14″ to 16″ will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.
how to select chainsaw Related Question:
How do you determine what size chainsaw to use for a job?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
What size of chainsaw do I need?
As a general rule of thumb, you want to choose a saw that has a length of approximately 23 inches longer than the diameter of the tree or limb you need to cut. For example, if you want to cut a 10-inch tree in just one pass, you will want to use a 12-inch bar.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What size tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
How many cc chainsaw do I need?
Your work will determine the type of chainsaw you purchase. Heavy work: If the task requires long hours felling trees, consider a professional chainsaw powered with a 65 to 110 cc engine and a guide bar of 16 to 20 inches. Moderate work: Cutting logs for firewood only needs a 55 cc engine with a 16 inch guide bar.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
Can you change bar length on chainsaw?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
Is Poulan Pro a good chainsaw?
The Poulan Pro is a good budget chainsaw for the newbie who wants a good introduction to gas-powered saws. It might also be useful to note that Poulan is owned by Husqvarna. It offers a simple, reliable starting set up and good power for most small to medium suburban jobs. It’s easy to clean too.
What size bar can I put on my STIHL chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
What is a 14 inch chainsaw good for?
In chainsaw descriptions, the term “light use” covers pruning trees and shrubs, and general maintenance. Light-use chainsaws’ cutting bar typically is under 14 inches long. Pruning ornamental trees and shrubs that don’t have thick branches is simple with these novice-friendly models.
Do I need a bigger chainsaw?
The usual guideline is to choose a chainsaw with a bar that is two inches longer than the diameter of what you need to cut. For example, if you need to cut a tree that is 10” across, you will need a chainsaw of 12”.
What makes a chainsaw powerful?
Chainsaw Buying Considerations and Cost For DIYers, the primary consideration is power and usage. A more powerful saw will require a gas motor, while a less powerful, more mobile one can be driven by an electric motor.
What chainsaw has the most CC?
The world’s most powerful production chainsaw. A direct replacement of the MS 880, the MS 881 is the most powerful chainsaw in the market with the highest displacement (121.6 cc) and engine power (6.4 kW). Built for high performance work, this saw is the optimum choice for professional foresters and loggers.
Can I use a chainsaw to split wood?
It isn’t recommended to split the logs using the chainsaw due to safety concerns, however, cutting the wood down to the appropriate size is ideal for the chainsaw.