The Reecoil full reach chainsaw lanyard, compatible with Stihl and Husqvarna chainsaws, provides many benefits to arborists including: You will get full reach with both arms Saw hangs higher on your harness Two ways of hanging & handling your saw Designed by climbers, for climbers! Stretches further than any others at over 4.92ft while REECOILing back to a compact size of 1.64ft Recommended for use with top handle saws only Non-Tearway. The REECOIL Full Reach chainsaw lanyard has been designed to give you full mobility while climbing, cutting and working at height. Designed to work with the Stihl MS200T, MS201T, MS192T and Husqvarna T540XP. You will get full reach with both arms Saw hangs higher on your harness Two ways of hanging & handling your saw Designed by climbers, for climbers! Stretches further than any others at over 4.92ft while REECOILing back to a compact size of 1.64ft Recommended for use with top handle saws only Non-Tearway.
The REECOIL Full-Reach chainsaw lanyard has been designed to give you full mobility while climbing and cutting. This is because of our coil tool lanyard design, which means your movement isn’t restricted while making cuts and handling your chainsaw. Attach to the rear DRing on the back of your chainsaw with a girth hitch and use the extra sewn loop to bring the hang carabiner as close to your chainsaw as possible.
The REECOIL Full Reach chainsaw lanyard is a heavy-duty stretching lanyard that gives you as much mobility as possible while climbing, working, and cutting. When stowed on your harness, the REECOIL is as short – if not shorter – then most other lanyards, but can extend farther than any other lanyard, allowing you to get the full reach out of both of your arms.
The Reecoil Full Reach Top Handle Chainsaw Lanyard is meant to keep your chainsaw attached to your saddle while climbing. Utility: The larger loop end of the lanyard wraps around the connection point on the chainsaw and the smaller loop end attaches to your saddle with the help of a carabiner. The tight coil on the chainsaw lanyards allows you to snap the saw close at hand then when need be.
top handle chainsaw law Related Question:
Can I use a top handle chainsaw?
Top-handled chainsaws are only suitable for use off the ground. Operators must use rear-handled saws when working on the ground.
What is a top handle chainsaw for?
What is a Top Handle Chainsaw for? Top handle chainsaws are designed to be operated off the ground, even with a single hand. They are more suited for professional arborists for pruning down branches while climbing a tree. In a top handle chainsaw, all the necessary controls are mounted near the top handle.
Can you use a top handle chainsaw one-handed?
Top-handled chainsaws should not be used one-handed either in place of poor work positioning or in preference to a handsaw whilst cutting smaller material at branch tips.
What is an arborist chainsaw?
Arborist chainsaws are essential power tools to climb a tree and prune overgrown branches, or even cut damaged ones due to their lightweight design. The best arborist chainsaw goes beyond this, they’re also easy to maneuver with only one hand.
Can you use a chainsaw one handed?
One-handed use can result in the operator having less control over the chainsaw. In one-handed use the saw may skate, bounce or kick back on contact with the material being cut, or may come into contact with the operator’s free hand/arm if used incorrectly.
What is the lightest gas chainsaw?
The X Series ECHO chainsaw CS-2511T 12 in. is the lightest gas powered chainsaw in North America. The 25.0 cc professional-grade engine delivers incredible horse power from a compact, easily maneuverable body.
What is a pruning saw?
Definition of pruning saw : a saw that has a usually tapering straight or curved blade and either a closed or an open and sometimes folding handhold and that may or may not be attached to a pole.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Can a chainsaw cut through bone?
Bones may be slightly tougher, but they are rigid and a chainsaw will likely be able to cut through them without much problem – though it will probably dull the blade more than wood.
What does MS mean on Stihl chainsaws?
Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.
Is Echo as good as Stihl?
Conclusion. Echo and Stihl are both options. If you want a powerful and lightweight chainsaw, then an Echo model might be the right choice for you. Stihl makes more sense if you are after a well-built, durable, full of extra features, fuel-efficient chainsaw.
How thick can a pruning saw cut?
Pruning saws are your choice for wood about 1.5 inches thick or more and your last resort before the very large stuff that you might only be able to do with a chainsaw. As such, they are used to cut a wide range on the large end of wood thicknesses.
What is the best tool to cut tree branches?
For the cleanest cuts, choose bypass pruners, which cut like a pair of scissors, with a curved cutting blade that slides past a lower broad blade. Also called lopping shears, a lopper is the tool of choice for cutting branches 2 inches in diameter. The lopper label should specify the branch size it will cut.