The extended shaft provides easy access to those difficult-to-reach areas.
With a powerful motor, you can grind at a high speed (25000RPM).
Collet sizes are 1/8″ (6mm) and 1/4″ (6mm) (3mm).
90 PSI working pressure; 1/4-inch air inlet size; 4CFM of air consumptio.
For ease of use and to reduce hand fatigue, the handle has been designed ergonomically.
Features.
Fast, low-noise operation; low air consumption; high concentricity; and simple setup and operatio.
– The rear-row design prevents dust from blowing onto the ground surface, and any excess lubricant is discharged through the rear vent.
In the mold, hardware products, glass, stone, handmade crafts, ornaments, circuit board manufacturing and other industries, it is widely used to shape blanks, cut them, grind them, and finish them. – It is widely used in the mold, hardware products, and glass, stone, handmade crafts, ornaments, circuit board manufacturing, and other industries that require blank shaping, cutting, grinding, and finishing homework.
Specifications.
– Collet sizes: 3mm and 6mm (1/8″ and 1/4″), respectivel.
– Free Rotational Speed: 22000 rp.
– Air flow rate: 3.5 cf.
– Air Exhaust is located at the rear of the vehicle.
– Air Pressure: 90 pounds per square inc.
– Air Inlet Size: 1/4 inch.
– Approximate total length: 282mm/11 inches.
– Overall length: 152mm (6″) in lengt.
Included in the package.
One (1) air die grinder (optional).
– 2 x Wrenches (optional).
One (1) Air Connector is included.
– 1 x Instruction Manua.
– 2 pieces of Colle.
Although it appears to be a little cheap, it is quite the work hoarse.
