Making straight cuts For accurate cuts, run the saw along a straightedge guide instead of trying to follow a cut line by hand. If using a straightedge guide to cut large pieces of sheet material such as plywood, check the guide is accurately positioned by starting the saw and pushing it forward to just barely nick the edge. Using the cutting guide To use the factory edge of a piece of timber for accurate cuts along the grain, use the T shape cutting guide called a ripping or side fence that normally comes with the saw.
Circular saws don’t have effective guides that keep them moving straight along a cut line. Together, these things make it challenging to keep a saw on your desired cut. The Accu-Cut™ is portable, too, so you can take your saw to the workpiece and cut with precision, rather than having to handle heavy sheets on a table saw.
circular saw guide nz Related Question:
Do you need a guide rail for circular saw?
If you want to make accurate cuts when using a circular saw and do it consistently, you need a guide rail. With these rails, you can control the blade far much better than when cutting without one. When cutting hard lumber, the blade can move unexpectedly, which can affect the cut accuracy.
Is there a guide for a circular saw?
A circular saw guide rail is a critical tool for making straight cuts on large boards, but choosing the best one for your workshop is not easy because there are many brands available, and a lot of newer woodworkers aren’t sure how to tell the difference from one brand to the next.
How do I know what size circular saw to buy?
Circular Saw Features Blade capacity determines the maximum depth of cut a saw can achieve. The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
What is a rip guide on a circular saw?
These simple-looking metal contraptions are designed to help you make long accurate rip cuts using only a circular saw. The basic idea of the rip fence is a guide that attaches to the base of your saw and allows you to cut at a fixed distance from the edge of your board.
Can you add a laser guide to a circular saw?
If you’ve seen those laser cutting guides on miter saws and wonder if you can add one to your old saw, take heart. It’s possible, and not terribly expensive. The guide fits alongside the blade, replacing the outer washer.
How do you use a circular saw guide?
Using a saw guide will ensure the tool cuts in a straight path. Place a speed square across the board you’re cutting, with its lip hanging over the edge. Get your blade aligned with the cut line and slide the straight edge of the speed square against the saw shoe.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Can a 5 1/2 inch circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
Is it okay to cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers.
Is it a guardrail or guide rail?
According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.” Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
Can you use a guide rail with any circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Does Kreg Accu cut Work with Dewalt circular saw?
Answer: this product should work with any brand circular saw.
