For example, a two-inch angle grinder can be used to polish the surface of a car before it is painted. It can also be used to remove rust from metal and to polish wood furniture.
The 90-degree angle grinder tool has a body that is 1.4 inches in diameter and a rubber sleeve that goes over the body to make it easier to grip and use. The 90-degree angle of the grease nipple makes it easy to add lubricating grease to the right-angle gear. The air inlet has a filter to keep impurities from getting into the cylinder. The sanding disc can be easily and quickly replaced.
Compressed air with a pressure of 90PSI is used as the power source for the angle grinder. High-strength cylinder: 0.6 HP, 20,000 RPM max speed. The air angle grinder has a speed control knob that can be easily changed and controlled to meet the needs of the job.
Safety: There is a rubber cover on the outside of the angle grinder body that makes it easier to hold with one hand. A double ball bearing system is used to keep the rotating shaft from moving too much and to keep it stable. The pressing handle has a safety lock to make sure it doesn’t start by itself.
A pneumatic angle die grinder, a 1/4-inch collet, a 1/8-inch collet, two wrenches, an air hose, and a set of disc holders are all included in the package. The disc holders are 2 inches wide and 50 millimeters long. There are two types of disc holders: one for 1/4-inch discs and one for 2-inch discs (P80, P120, P180, P240, P320.
People who have bought this item.
In the workplace, there are 1/4-inch high-precision chucks that can be used. A simple structure, reliable connection, high wear resistance, high clamping force, high concentricity, and easy assembly are just a few of the benefits.
In this case, the high carbon steels collet is 1/4″ (6.35mm) in length. It’s easy to use and has a good quality. It doesn’t come loose after high tension, high-temperature carburizing, and can handle more impact strength.
Stepless speed regulating switch: It keeps the speed steady and makes it easier to change the speed. Choosing the right speed for different purposes meets the needs.
Design: The air inlet and exhaust port has a humanized design that prevents dust from getting into the body and making the air cleaner.
Plate-type on-off switch: Pressure plate-type on-off switch makes it more safe and reliable when working in different places.
People who make this thing.
Angle Air Die Grinder is made of aluminum alloy and plastic.
2″ (50MM.
Assembled Collar Size: 1/4″ (6.35mm.
The max free speed is 2000RPM.
The recommended air pressure is 90PSI.
Amount of air used: 2.8 CFM (80L/min).
The diameter of the pendulum is 1/4 NPT quick connect.
At work, the pressure is 6 bar.
1.6 lbs: The weight of the ite.
A package comes with.
✔ 1 Pc Pneumatic Angle Die Grinde.
At least one 1/4-inch Collet.
At least one of these is a 1/8-inch Colle.
2 Wrenc.
1 Pc American Standard Air Plu.
In this case, we have 1 Disc Pad Holder that is 2 Inch/50 mm.
✔ 1 Pc 1/4 Inch Holde.
1 Pc Wool Grinder Discs (50 mm/ 2 Inch.
✔ 1 Pc Silicon Carbide(SiC) Disc(2 Inch/50 mm.
Each disc is made of Zirconia Alumina with a density of 80 grains per square inch.
In this case, there are 5 aluminum oxide quick change discs (P80,P120,P180,P240,P320.
Please add a few drops of lubricating oil to the air inlet before you use it. This will help it last longer if you keep it clean and dry. It can’t be stored in a humidor or in an open-air place.
:. In a nutshell. Arrived earlier than I thought.
