Super thin design for fast burr-free cutting with minimal material loss, making your cutting project more precise and efficient. Metal Cutting Discs are manufactured using with tough aluminum oxide, heat-treated aluminum oxide , monocrystalline fused alumina or silicon carbide abrasive grain and fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Thin Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals,extremely fast cutting with sharpness ,minimal vibration for more comfortable working,.
Get the most out of your angle grinder by using different types of angle grinder wheels. The most apparent disc and probably the most popular one among different types of angle grinder discs is the grinding disc. Similar to other angle grinder discs, wire wheels are produced in different shapes and sizes because they are used for different purposes.
100mm angle grinder discs Related Question:
Can I use 105mm blade in a 100mm angle grinder?
These blue turbo rim blades are designed and built for the trade user where regular trade use is expected. This blade is designed to fit to a 100mm angle grinder and will cut a wide range of materials (see chart).
Can I use a larger disc on an angle grinder?
Discs are not designed for the higher speed, and if used, risk the possibility of the disc shattering and striking the user and others. Unsafe 230 mm (9 inch) angle grinder with 356 mm (14 inch) disc fitted and guard removed.
Are grinder discs universal?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
How deep will a 115mm angle grinder cut?
While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
What is the most common angle grinder size?
For instance, a 4.5-inch angle grinder is the most common size. It utilizes wheel discs that are 4.5 inches in diameter. A 7-inch grinder uses a 7-inch disc, and so on. It is important to understand that the bigger sizes use larger wheels.
How do you cut concrete with an angle grinder?
Keep both hands on the grinder and wait for the blade to reach full speed and ensure that you are braced for the gradual change of the strength. Now apply some pressure to pass the blade through the concrete. Don’t force the blade into a cut. Make a series of gradually deeper cuts to avoid overheating the blade.
Can you use a 4 wheel on a 4.5 grinder?
No, you can’t use a 4″ wheel on a 4 1/2″ angle grinder – 4″ uses a 5/8″ diameter hub, while 4 1/2″ and 5″ use a 7/8″ diameter hub.
What is the difference between a cutting disc and a grinding disc?
Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting.
How do I choose an angle grinder disc?
depends on the type, shape and thickness of the steel that needs to be cut. For standard everyday jobs on either stainless or mild steel using an angle grinder, choose a 1mm or 1.6mm thickness in your disc. For projects that involve thin metal such as sheet metal, choose a 1.0mm or 0.8mm thinner cutting disc.
Can you use a cutting disc for grinding?
Cutting discs are thin and sharp and can’t be used for grinding. Make sure that the grinder is attached properly and the bolts are tightened.
Can you fit a smaller disc to angle grinder?
Yes. As long as the arbor size is the same and the outer diameter is the same or smaller, the discs are interchangeable. Just an aside.
What is Type 27 cut off wheel?
A Type 27 Cut Off Wheel is often referred to as a depressed center wheel. The mounting hardware is in the depressed center, allowing for flush cutting. The Type 27 Cut Off Wheel must be used with an appropriate guard and a depressed center back flange. The center hub protects the user from cutting too deeply.
What is INOX cutting disc?
INOX means stainless steel cutting disc. INOX cutting disc means that the cutting wheel does not contain iron and therefore has the ability to cut stainless steel and mild steel.
Will an angle grinder cut slabs?
Chalk or a pencil. A workbench. Four C-clamps (to secure the slab in place) Power saw or angle grinder with a diamond-tipped blade made specifically for stone or masonry (this is important as blades made for wood will become dull almost immediately)
How deep will a 230mm angle grinder cut?
The 230mm ANGLE GRINDER: for heavy-duty grinding, facing and cutting masonry and metal. As a cut-off machine it has a 64mm (2.5in) depth of cut.
