In this 3-in-1 package, you’ll receive an attachment for right angle drills of 105 degrees, an extension for right angle drills of 1/4 inch in diameter, and an 11.6-inch flexible extension bar.
Material: Steel + rubber extension bar; chromium vanadium alloy steel with magnetism right angle drill; right angle drill with magnetis.
Magnetic Socket Built-In: Holds standard hex drilling and drive bits in place, preventing them from falling. Drills, drive chucks, and wrenches all have a 1/4″ hex shank that can be quickly changed.
Wide range of applications: They can be connected to a drill, rechargeable drill, or manual wrench, allowing them to reach previously inaccessible stenosis, twist screws, and nuts, among other things.
These tools are excellent for light drilling, slow speed screw driving, and other applications such as cordless drills and ratchet hand screwdrivers. However, they are not compatible with high speed and heavy force drills, even though they are tough for good torque spin.
100 percent brand new and of superior qualit.
Specification.
Stainless Steel is the primary material.
Silver and black are the colors used.
Dimensions: as depicted in the photograph.
Bending: 105 degree.
1/4 ” Hex Shank Standard Hex Shank (6.35 mm.
Fits the following tools: 1/4″ 6.35mm hex drill bit screwdrive.
Feature.
1. 105 DEGREE DESIGN – excellent for working in confined spaces and enhancing the power of a cordless screwdriver.
INCLUDES A BUILT-IN MAGNETIC SOCKET, which securely holds standard hex drilling and drive bits and prevents them from falling.
Three-quarter-inch hexagonal shank is easily interchangeable with drills, drive chucks, and wrenches.
4. 1PC SOFT SHAFT – 1/4 inch hexagon drill bit connection that can be used with both a hand drill and an electric dril.
5. Included in the package are two (2) right angle drills and one (1) soft shaft (11.6 inch length, Black).
So many times, this tool was exactly what I needed to drill holes in difficult-to-reach places. It is MUCH better than using a dedicated right angle drill, as the chuck and head on those take up a lot of space in areas where you need to have the most clearance possible. This was used to increase the size of the cable holes in an electric bass guitar, which were located in the electronics compartment and were designed to accommodate larger wiring harness connectors. For a right angle drill, this is impossible. However, with the help of my small Metabo electric screwdriver and attachment, as well as some hex shaft drill bits, I was able to complete the task quickly and efficiently. It’s fantastic!
