Machine tool spindle motor with air cooling, ER16 collet, voltage:110V, 1.5K. 1.5KW Inverter VFD 110V, 115V, 230. This kit will be shipped from our USA warehouse via UPS for no additional cost to the customer in the United States.
Runout off: less than 0.05mm, speed: 0-24000rpm, variable frequency drive (AC 220V), frequency of inverter: 0-400Hz, runout off: less than 0.05m.
This spindle is only capable of rotating in the clockwise direction; it does not support reverse rotation. Please keep in mind that the spindle speed cannot be lower than 9000rpm!!.
The spindle motor is primarily used in the wood, aluminum, glass, PVC, and PCB industries, among others. It is particularly well suited for non-metallic engraving.
The spindle motor is used in a variety of applications such as lathes, mills, car hoists, pumps, and conveyors.
Included in the package are.
Spindle motor with an air-cooled design (ER16) rated at 1.5 kW and 110V.
220V output from a single 1.5KW inverter VFD with a 110V input.
11 x ER16 Collets are included.
1.spindle motor (also known as a worm drive).
Specification.
Stainless Steel is the primary material.
Dimensions: 80x200mm (Middle body diameter:80mm x Length:200mm.
1.5 kilowatts of powe.
110 volts alternating curren.
8A is the current value.
Frequency range: 0-400 hert.
Speed ranges from 0 to 24000rpm.
Air-conditioning is used for cooling.
Precision: 0.003–0.005 millimeter.
Runout is less than 0.05mm (millimeters).
Grease is used for bearing lubrication.
ER16 is the collet size.
P4 class bearings (C7004x2 + C7002x2), four bearings (C7004x2 + C7002x2), angular contact bearing.
Power Interface: Optional GX16 waterproof air plug, with the numbers 1234 and 123 connected to the inverter power supply (U, V, W), and 4 connected to the inverter ground. There are 1234 and 123 marked on the plug.
a 1.5-kilowatt variable frequency drive (VFD) at 110.
1) Input voltage: 110V (+/-15 percent); 2) Output voltage: 110V (+/-15 percent).
2) Voltage of the output: 110VAC (+/-15 percent).
3) Frequency of the input signal: 48-63 H.
4) Frequency range of output: 0-400 H.
5) Phase of the input signal: one or three phase.
6) Output Phase: There are three phases.
ER16 Collets are a type of collet that is 16 inches in diameter.
Measurements in millimeters and millimeters and millimeters and millimeters and millimeters and millimeters and millimeters and millimeters and millimeters and millimeter.
Material:Aluminu.
The main application is in the wood, aluminum, glass, PVC, PCB, and other industries; however, 65mm is not required; please see all of the pictures.
