The Air Random Orbital Sander is a high-quality professional tool that has a 2 inch and 3 inch hook and loop pad (Velcro Backing pad).
Furniture and woodwork, mold making, polishing automotive and detailing work, removing solder joints and rust spots on metal products, deburring, and fine polishing are all good uses for this tool.
A built-in regulator in a sander lets you change the speed at which you work to meet your needs for polishing, sanding, and waxing. This allows you to get quick and accurate results.
Taking a grip is easy because it’s small, light, and doesn’t make a lot of noise.
There are different types of sandpaper that can be used with different types of discs so that they can be used for different jobs.
With a professional air random orbital sander, you can make hard surfaces or sharp edges look smoother and more even. It’s good for sanding focus areas, removing solder joints and rust spots from metal products, and cutting the edges of things.
People who have bought this item.
For professional work, the air sander comes with an extra 3″ hook and loop pad that can be used to sand, grind, carve and polish. It can also be used to apply wax and polish.
The air sander has the following.
First, it’s small and light. It has a high level of stability, high speed, and doesn’t swirl. It’s very easy to use with one hand. Orbital movement makes sure the job is done right.
2. The air sander can stay cool quickly if it has a back exhaust. This will make it work for a long time.
3. Double-rotation polishing to make the polishing more even and smooth.
4. You can change the amount of air coming into the air inlet to control how quickly you sand, polish, and wax.
5.The air sander can stay cool quickly if it has a back exhaust. This can make it work for a very long time.
6. A high-precision balancer and shaft, low vibration, and more strength. 6.
Seven. This is a professional-grade mini orbital sander with a 2″ and 3″ hook and loop pad (Velcro Backing pad).
Application.
Useful for sanding focus areas, deburring furniture and woodwork, getting rid of solder joints and rust spots on metal, polishing cars, molding, and more.
Random air sander specs.
Sanding pads come in two different sizes: 2″ and 3.
Its diameter is 3mm.
Air Use: 12 CFM @ 90 Ps.
Non-load speed: 15000RP.
It’s called “eccentric double-rotation..
A 1/4″NPT air inlet and a 1/4″NPT exhaust are on the back.
Weight: 1.82 pounds (0.83kg.
Box: What’s insid.
An angle air sander with 1Xpc of random orbit.
2 inches of hook and loop pad 1Xpc (50mm) is installed, and there is a 3 inches of hook and loop pad 1Xpc (73mm) back up.
American standard 1Xpc 1/4 NPT quick connect.
There is a pin that is about 0.3 inches by 5 inches. You can use it to replace the hook and loop pad.
OneXpc’s Instruction Manua.
Kind of a Reminder.
Random orbital air sander: Add 2-3 drops of oil from the air quick connector. Then let the tool run for a few seconds to make sure it works well, then use it.
You can use it with your hands. Use it to clean, sand, and polish stainless steel and aluminum. It’s great for small areas, especially.
