One of the packages has two leather belts that measure 1/4″ x 12″. Belts for Leather Honing: Work Sharp – WSKTS Belt Sander.
Premium White Diamond and Green Stainless Buffing compounds, as well as instructions, come with this package.
Superior Quality leather hides are used to make these shoes. They are consistent in thickness and free of flaws.
Every 1/2″ x 12″ Leather Belt we make is checked to make sure it fits before it leaves our shop.
The products we sell come with a 100% money back guarantee.
1/2″ x 12″ Leatherbeltman’s bel. There are now two different types of leather honing and polishing belts that come in a two-pack. This two-pack of leather belts comes with both our traditional White Diamond Compound and our Green Stainless Compound, which are both made of leather. To use Leather Honing Stropping Belts, you need to have a Work Sharp – WSKTS Belt Sander.
Premium White Diamond and Green Stainless Buffing compounds, as well as instructions, come with this package. In the White Diamond, a precision finishing compound, there is a micron grade of 1, and the micron range is (0-2). There is a mesh equivalent to 14,000. In this case, the Green Stainless is an ultra-fine finishing compound with a micron grade of 0.50, a range of microns (0-1), and an equivalent mesh count of 60,000. Quality compounds we make have a shelf life of at least 10 years at the very leas.
Every Leatherbeltman Leather Honing Stop Belt is made from leather hides that are of the best quality and are free of flaws.
**PROUDLY MADE IN THE USA*.
Every 1/2 x 12 inch Leather Belt we make is checked to make sure it fits before it leaves our shop.
When we sell something, we stand behind it 100%.
This is a really cool thing.
The belt itself is well-made, though. “Ba-dump”: It doesn’t “Ba-dump” over the seam. I haven’t had it long, but it looks strong.
That substance was hard to put on, so I didn’t use it very often. Some of it was just a little too crumbly. At first, more of it broke and turned into dust or crumbs than went on the belt. The trick I found was to put just a little bit of vegetable oil on the block of abrasive. It’s wax/oil based, so I think it worked. Because the surface was softened, the belt could pick up some and get it into the surface.
It can sharpen just about anything, as long as you know how to do it first. Make the blade very sharp by hand before using this belt and compound. Then hone it to a fare-thee-well with this belt and this compound.
I sharpened kitchen knives, a plane iron, and a chisel with this belt on the work-sharp. All of them were done with this belt. Because I got the chisel’s edge so sharp, it went right through a leather work glove, so be careful.
Excellent. Buy one now.
