Belts for 3×24 aren’t exactly hard to find but 3×21 are certainly easier to find and less expensive. FWW tested all of the 3x21s in the May/June 2004 issue and rated the Ryobi a Best Value. The Makita 9903 was one of two “Best Overall” sanders, the other was the DeWalt DW433K. Both the “Best Overall” were estimated at about $200 with the Ryobi $100. The DeWalt removed 110g and the Makita 102g. The DeWalt is 12lbs, the Makita 9.5lb and the Ryobi 7.9lbs. The Ryobi caught 94% of the dust as did the Makita, the DeWalt only caught 70%. The Ryobi looks like the Bosch – it is flat on the top so you can turn it over and use it like a little stationary sander.
Here are three things to consider before adding a belt sander to your home workshop. The standard belt sander operates with a 3-inch wide belt, but there are different size classes to choose from: 3×18-inch sanders, 3×21-inch sanders, and the largest, 3×24-inch sanders. Clamp the belt sander upside-down to a sturdy work bench and press the tool you’re sharpening lightly to the belt.
Belt sanders are the big, powerful gorillas of the sanding world. If you’re new to belt sanders or have been frustrated by yours, read on to find out how to keep that big ape under control. Sanders for $100 to $250 when looking for the best belt sander.
21 or 24 inch belt sander Related Question:
What size belt sander should I get?
SIZE. The size of a belt sander is measured by the width and length of the belt. Belts range in size from small, detail-type sanders with belts that are only an inch or two wide to heavy-duty 4″ x 24″ machines. A common size for home shop use is a 3″ x 21″ sander.
What is the most common belt size for a belt sander?
Hand Powered Belt Sander The most common sized belts used on Hand Sanders are 3” x 21”, 3” x 18” and 4” x 24″ sanding belts.
Is a belt sander worth it?
Belt sanders are highly effective tools for removing roughness and preparing woodwork for less aggressive tools in the process like random orbit and finishing sanders. It is crucial to belt-sand with the wood grain rather than across it. Otherwise, the belt sander’s lateral action can ruin the work.
What is the best speed for a belt sander?
The optimal speed for belt grinders is largely dependent on a number of factors, including type of abrasive grain, grit grade, workpiece material, and more. Generally speaking, a safe speed in most cases is 3,000 surface feet per minute. You can calculate surface feet per minute using the formula SFPM = RPM X .
How much wood can a belt sander remove?
As mentioned earlier, abrasive belts can only remove a certain amount of stock dependent on grit size. With a three-head sander you can run a grit sequence of 100-150-180 and remove approximately 1/32 inch in one pass.
What kind of sanding belts are best for metal?
As high-performance belts, both zirconia and ceramic sanding belts will last longer and remove metal faster than aluminum oxide or silicon carbide sanding belts. Both belts have the ability to resharpen as they wear and both are primarily used on metal applications. In the end, both types of belts are excellent belts.
What is a 1 inch belt sander used for?
The H3140 1″ x 30″ Belt Sander provides a moving abrasive surface that can be used to shape and contour small workpieces. By tilting the adjustable table, sanding operations can be performed on miter-cut, or other angled workpieces.
What size belt do I need?
The general rule for measuring a man’s belt size is to take your pant size and add 2 inches. For example, if you wear a size 34 pant, we recommend a size 36 belt. You can also use a tape measure where you will be wearing your belt, that number is where the center hole of the belt will fit.
Can you use a belt sander on wood?
Belt sanders excel at the rapid removal of wood, making them the best handheld power tool for leveling and smoothing rough boards. Start at an angle to the grain for aggressive leveling, then finish with the grain. 80-grit is good for starting, then switch to 120-grit.
How do you find the linear speed of a belt?
A conveyor speed, or in this case the linear belt speed, can be calculated using the formula pi/2*D*RPM/60. In this formula, D is diameter and RPM is the rotations per minute of the conveyor. The value is then divided by 60 to convert the speed into distance per second.
How do I determine my belt speed?
Calculate the belt velocity by multiplying the circumference of the pulley by the speed of the pulley. For example, the drive pulley has a circumference of (Pi)(D2). This equals 2(Pi). The speed of the pulley is 1,800 rpm.
What’s better orbital or belt sander?
A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
Is an orbital sander better?
Advantages. The best feature of the orbital sander is its square shape, which allows it to get in corners and up against edges. You can also use regular sandpaper cut to fit rather than purpose-made random-orbit sanding disks. Orbital sanders aren’t overly aggressive, so it’s hard to remove too much material.
Which is better palm sander or orbital sander?
As compared to a palm sander, orbital sanders are more massive tools, which means that palm sanders are smaller and more lightweight. The motions of orbitals are Circular and orbiting, and palm sanders only have orbiting motion. If you want to work with larger pieces, orbital sanders are better than palm sander.
What is the difference between a belt sander and a belt grinder?
The belt grinder belt speed typically runs double from what the belt speed of the belt of a belt sander is running at. Belts grinders you generally have multiple grinding points such as the platen and the second grinding point is the contact wheel.