14 Air Belt Sander Belts (#60,80,120) are in the package.
A lot of different things can be done with this: It can be used to cut and polish metals like steel and copper, as well as plastics and aluminum. It can also be used to cut and polish plastics like rubber, glass, and stone. It does a good job of getting rid of the weld bead at the corner edge. It can be used for jobs in small spaces with recessed corners.
High Quality Stainless Steel: This is made of high quality stainless steel. It is very resistant to rust, corrosion, and pressure. It has a beautiful look and a long service life.
It has high stability, low vibration rate, low energy consumption, a small shape, and is easy to move.
The handle is made in a way that makes it easy to hold and not to slide when you’re using it.
For long-term use, the trigger switch is made of metal and has a knurled handle that isn’t slippery or slippery.
Size: The belt is 10mm wide by 330mm long, and it can go up to 165000 RPM. The belt’s inlet thread is 1/4 inch, and it weighs 0.9K.
Attention.
1. Please put 2-3 drops of hydraulic oil on the air quick coupling before you start to work.
Allow the sander to run for about 20 seconds before you start to work on the wood.
3. Please make sure that the air inlet is clean and free of dust and dirt.
To keep air moving smoothly, please clean the air filter on your regulator valve’s air filter.
Specifications.
Speed: 16000rm.
Three-eighths-by-13-inch belt.
1/4.
3/8.
Avg. Air Use: 6cf.
Working pressure is 90psi.
Packages come with.
An inch-by-ten-inch belt sande.
12×belt.
1×wrenc.
It seemed like a good tool at first, but after the third time I used it, it didn’t work. It doesn’t work any more, and I used it for about a minute. So, I’m stuck with it. People who buy things should be aware.
