a fantastic combination of a 3″/80 mm rotary table and a 65 mm self-centering chuck with back plates and Tnuts—a perfect milling combination for smaller mill.
Table with a diameter of 80 mm (3″. The table is graduated in all directions. Cente. 2-5/8″ in height when in the vertical position without the chuck (66 mm approx.
The 80 mm Diameter Rotary Table can be mounted both horizontally and vertically. It has a diameter of 80 mm.
As the worm:gear ratio is 1:36, one handle rotation will turn the table by 10 degrees, and vice versa.
The kit includes a 65 mm 3 jaw self centering Chuck, a Back Plate, and T nuts for quick clamping.
Table with a diameter of 80 mm is described as follows: (3″. The table is graduated in all directions. Worm Gear Ratio is -1:36, which means that one rotation of the handle will turn the table by a full ten degrees. Cente. 2-5/8″ in height when in the vertical position without the chuck (66 mm approx. The hand wheel is graduated in 10-minute increments and has the option of being reset to zero. It is possible to mount it in both horizontal and vertical positions. The kit includes a 65 mm 3 jaw self centering Chuck, a Back Plate, and T nuts for quick clamping.
The jaws are not square and will need to be re ground before they can be used, and the operation is not smooth and will require cleaning.
