If you need replacement aftermarket parts for your ST MS290 MS310 MS390 029 031 039 Chainsaw, HUZTL has them. We carry wide range of parts for them, including cylinder piston kits, ignition coils, air filters, carburetors, recoil starter, chain sprocket cover, muffler, handle bar, fuel tank and many more, Check out our listings of ST aftermarket chainsaw Parts for ST MS290 below.
310 stihl chainsaw parts Related Question:
What size chain does a STIHL 310 chainsaw use?
3-Pack 20″ Full Chisel Saw Chain for Stihl MS 310 Chainsaws – (20 inch, 3/8″ Pitch, 0.050″ Gauge, 72 Drive Links, CSC-D72)
How much is a MS 311 STIHL chainsaw worth?
Starting at $569.99 with a 18″ bar and chain The MS 311 is a high-tech workhorse with a step up in horsepower and features over the MS 291. With our improved engine technology, you get higher fuel economy for longer run times. The MS 311 also has larger fuel and oil tanks for even longer extended use.
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
How much does a Stihl 311 weight?
20.3 oz. 3.6 cu. in. Note: STIHL recommends use of fuel with no more than 10% Ethanol content.
How big of a bar can you put on a Stihl 311?
Heavy-Duty Chain Saws All of these models — which include the MS 271, MS 291, MS 311 and MS 391 — can take guide bars between 16 and 20 inches.
Is a ms311 a pro saw?
They aren’t a “professional” grade saw, but they are good. Very relaible, and that’s probably the most important thing with a chainsaw.
How many cc is a Stihl 038?
Re: stihl 038 038av 038 av super specs 038AV introduced in 1980 with 61cc. Memory is struggling here 038 Super introduced in 1983 with 67cc.
How many cc’s is an old 44 Stihl?
Specifications. The Stihl 044 chain saw has a single cylinder, two-stroke engine with a 70.7 cubic centimeter displacement. A 70.7 cc engine is equivalent to 4.31 cubic inches.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Will a 3/8 chain fit a .325 bar?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
How do I know what pitch my chainsaw chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
How can I tell what size my Stihl chain is?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
How do you read a Stihl serial number?
Where do I find my serial number? Most serial numbers are stamped in the motor housing or crankcase to the left or right of the muffler looking down from the top on a flat surface. They will in most cases be 9 digits long and begin with the number 1, 2 or 5.
How do I identify my Stihl chain?
STIHL’s green and yellow color code system serves to identify STIHL bars and chains with different kickback reduction characteristics. Green (go) marks those products which are designed to reduce the risk of kickback injury and comply with the ANSI B175. 1 kickback standard.
What does MS mean on STIHL chainsaws?
Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.