“Ingersoll Rand’s EDGE Series 3101G 1/4” Air Angle Die Grinder is the right tool for the job. The angled shape of this powerful, 20,000 rpm angle die grinder lets you get to those hard-to-reach places. Use the 3101G pneumatic grinder in various applications including finishing, cutting, porting, weld breaking, deburring, polishing, and grinding.
The Ingersoll Rand Angle Die Grinder is ideal for weld grinding, deburring, surface prep and polishing. Delivers superior control when trying to get into hard-to-reach places.
300mm angle grinder disc Related Question:
What size do angle grinder discs come in?
The size of the disc should have a direct bearing on your choice of angle grinder. The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
How thick can you cut with an angle grinder?
The most common grinder disc size is with a diameter of 12 cm. It can be used for small jobs as cutting wood or metal with a maximum thickness of 2-3 cm. It’s not recommended to use it for cutting stones and concrete.
Do all discs fit all angle grinders?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
How deep will a 115mm angle grinder cut?
While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
What is the most common angle grinder size?
The most commonly used sizes are the 4” and 4 ½”. These grinders typically have the capacity for wheel diameters of up to 7”, with particularly small versions having the capacity for 3” discs.
Can you use wood cutting disc for an angle grinder?
Now, if you’re only looking to cut small woodcuts (like the edges of trim), or carve sections of wood, an angle grinder obviously has it place. But again, just make sure you use either a three-tooth wood cutting disc or a wood carving disc.
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
How thick should a metal cutting disc be?
Cutting discs are best for cutting through metal and are available in different thicknesses as explained below. For standard, everyday jobs on stainless or mild steel, opt for a 1mm or 1.6mm disc thickness. For cutting thin sheet metals, choose a 1mm or 0.8mm disc.
Can I use an angle grinder on concrete?
An angle grinder can be used to level, smooth and polish concrete by grinding it down. They can also be used to remove paint and floor adhesives. To grind concrete with a angle grinder you need a diamond cup wheel, a dust shroud attachment, and a vacuum cleaner.
How thick of steel can a grinder cut?
For standard everyday jobs on either stainless or mild steel using an angle grinder, choose a 1mm or 1.6mm thickness in your disc. For projects that involve thin metal such as sheet metal, choose a 1.0mm or 0.8mm thinner cutting disc.
How long do angle grinder discs last?
1 – Cutting and Grinding Discs Have Expiry Dates. Usually expressed as a month and year, such as 03/2018, these expiry dates are printed to comply with the manufacturing regulation, EN12413:2007+A1. This date is generally printed on the centre ring and is at a maximum three years from the manufacture of the disc.
What is a Type 100 angle grinder?
4′ (100mm) angle grinders, as the name suggests, accept grinding discs up to 100mm in size. These grinders are relatively small in size, and are suitable for smaller jobs. The size of disc that the grinder can accept dictates the depth of cut that the grinder can achieve.
How deep can you cut with a 4.5 inch angle grinder?
A 4.5 angle grinder has a blade that is 4.5-inches in diameter. This means the blade extends 2.25-inches for the center in each direction. As a result, it is not physically able to cut through 4 inch concrete. Select a larger grinder when a deep cuts are necessary, such as a 9-inch grinder.
Can I cut slabs with an angle grinder?
Four C-clamps (to secure the slab in place) Power saw or angle grinder with a diamond-tipped blade made specifically for stone or masonry (this is important as blades made for wood will become dull almost immediately)