680mm (26.8inch) in length; spring outside diameter (OD): 35mm; material width (8mm); material thickness (0.8mm).
Inner mounting type is a hook, and the outer mounting type is also a hook.
This is the spring with a chrome housing that returns the quill to the top of the drill after you have finished drilling.
For use in various vacuum cleaner coil springs, including volume tube coil springs, safe coil springs, and other similar device.
Chemical blackening improves the performance of the product by forming an oxide film that isolates it from the environment and prevents rust.
Pay attention to safe when installing springs. Do not tamper with the wire of the fixed springs.
Specification.
Spring steel is the material used (60Si2Mn.
Chemical Blackening is the final step.
Material Thickness : 0.8m.
8mm is the width of the material.
Spring outside diameter (OD): 35m.
680mm (26.8inch) is the length of the item.
Hook is the type of mounting used on the inside of the frame.
Type of mounting on the outside: hoo.
Contents of the package.
3 x Drill Press Sprin.
Description.
This is the chrome-plated spring that returns the quill to the top of the drill press after you have finished drilling, and it is a good replacement for many existing quill spring drill presses. 2.
Vacuum cleaner coil springs, volume tube coil springs, safe coil springs, and other types of coil springs are all commonly used.
2.Chemical blackening improves the performance of the product by forming an oxide film that isolates it from the environment and prevents rust.
When installing springs, keep an eye out for potential hazards. Do not tamper with the wire of the fixed springs. When installing the spring, insert a fixed wire directly into the spring, and the wire will slide out as the spring is installed.
