Buy Pneumatic Drum Sander 3

Included in the package. One 3″x9″ pneumatic drum sander and five 3″x9″ 120# drum sleeves.

In this case, the polishing air drum is used to polish the air drum motor, as well as to polish wood and other materials.

A lot of people use this to polish wood, furniture, and other things that aren’t made of metal.

Any long pump sleeve can be used with this pump sleeve sanding tool “diameter arbor, or even between two centers on a lathe, can be used to sand odd-shaped or curved parts.

To keep it from rusting, it has a wear-resistant thickening rubber and an aluminum shaft wheel. This makes it easier to move and less heavy and durable.

5pcs drum sanding Sleeves are high-quality aluminum oxide sanding belts that have good abrasion resistance and a good finish.

It has a manufacturer’s warranty for 90 days from the date you bought it.

If you have any questions, please don’t hesitate to get in touch with us.

We’ll do our best to help you.

Color: 3″x9” Drum with 5 Sleeve.

Features.

To keep it from getting rusty, the thickening rubber and aluminum shaft wheel are used. This makes it lighter and more efficient, as well as more durable.

-The polishing air drum is used to polish the air drum motor, and it is also used to polish wood and other materials.

You can put this attachment on the end of your 1 gallon pump sleeve and use this to sand it “diameter arbor, or even between two centers on a lathe, can be used to sand odd-shaped or curved parts.

– You can inflate or deflate the drum with a tire pump, and you can do both.

-With the right size of sand cylinder, the polishing air drum is flexible and can change its outer diameter through the aerated air discharge. This can tighten the sand cylinder to meet the high-efficiency polishing requirements, as shown in the figure.

Specification.

The sanding dru.

The materials are rubber and aluminum conductor.

Its diameter and height are 70mm and 230mm, or 3” and 9.

In this case, the bore’s diameter is 25mm..

1Pc is the amount.

They are called drum sanding sleeves.

Abrasive Aluminum Oxide, Cloth, and Resin Bond are the materials.

-Color: Dark Red, as shown in the picture.

-The size is 230x230mm.

-Grit: 120.

Quantity: 5 Pcs.

Packages come with.

It comes with a pneumatic drum sander and 5 drum sanding sleeves that measure 3 inches by 9 inches.

Note.

-Before you buy, please check the goods’ appearance, size, shape, and compare them to your own goods. Thank you.

-Light and different displays may make the item in the picture look a little different from the real thing.

If you get an item that isn’t the same size as the one on this page, the size could be a little different from the size above. You’re welcome.

It’s not 3 “The diameter of a circle. I think it’s 70 mm long. That’s 2.756 inches “In this case, I would say. One picture shows it. The center hole is not 1 piece “In this case, I would say. It’s less than 1 inch long “In this case, I would say. I had to grind it down to make it fit “a tree. It’s hard to find sleeves of different grits that will fit you. I’ve had to make my own or have them made for me.

Leave a Reply

Your email address will not be published. Required fields are marked *