If you’re budget-constrained and you’re in the market for something more affordable, then the CRAFTSMAN CMEG100 4-1/2-Inch Angle Grinder might be a better fit for you. The CMEG100 makes our list of the best angle grinders not because it generates 12, 000 RPMs with its 6 amp motor, but because it generates 12, 000 RPMs and doesn’t break the bank. One other noteworthy thing about the CMEG100 is the added benefit of the VERSATRACK Wall Organization System that allows you to neatly rack and stack the grinder utilizing CRAFTSMAN’S hook and accessories that can be purchased separately.
4 1/2 inch angle grinder Related Question:
What is a 4 1/2 inch angle grinder?
The 4-1/2 inch angle grinder is a brutal handheld power tool that can cut through anything from metalwork, mild steel, brickwork, and even cut tiles. The best bang for your buck 4-1/2 inch angle grinder on the market that has stood the test of time.
Which is better 4 inch or 5 inch angle grinder?
The number of cuts achieved with the 5” Angle Grinder were 100% greater than the 4 1/2” Angle Grinder. The 41% output power and 36% torque provided by the 5” Angle grinder, meant that the disc speed remained at its optimum, allowing the disc to work more efficiently.
How deep can a 4.5 inch angle grinder cut?
A 4.5 angle grinder has a blade that is 4.5-inches in diameter. This means the blade extends 2.25-inches for the center in each direction. As a result, it is not physically able to cut through 4 inch concrete. Select a larger grinder when a deep cuts are necessary, such as a 9-inch grinder.
What sizes do angle grinders come in?
Angle grinder size comes in a variety of sizes. But don’t get confused because there are only 3 sizes, namely the 4.5-inch, 7-inch and the 9-inch you could best choose from. The 4.5-inch is mainly for home and domestic use.
How deep can a 125mm angle grinder cut?
All in all, 125mm angle grinders are extremely versatile tools despite their limited cutting depth of just 38 mm. While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
Do all angle grinder discs fit?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Can you put a larger disc on an angle grinder?
You can but is a very, very unsafe practice. The disc has mass and spinning mass only runs in one plane safely, so any change in the plane will rip the grinder out of your control.
What size is a small angle grinder?
Small Angle Grinders A small angle grinder typically has the capacity for a disc of seven inches or less. They can be used for a range of cutting and grinding purposes and are featured across a variety of angle grinders. The most commonly used sizes are the 4” and 4 ½”.
Can an angle grinder cut through concrete?
Concrete cutting is a common task at the construction area, such as cutting concrete floor, concrete wall, concrete slabs and concrete pavers. Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.
Can I use an angle grinder on concrete?
An angle grinder can be used to level, smooth and polish concrete by grinding it down. They can also be used to remove paint and floor adhesives. To grind concrete with a angle grinder you need a diamond cup wheel, a dust shroud attachment, and a vacuum cleaner.
Can an angle grinder cut stone?
An angle grinder is a power tool that can be used for cutting through different types of materials, including metal and other solid materials such as bricks, aluminium, stone and concrete.
What is the most popular size angle grinder?
The most commonly used sizes are the 4” and 4 ½”. These grinders typically have the capacity for wheel diameters of up to 7”, with particularly small versions having the capacity for 3” discs.
How deep will a 9 angle grinder cut?
For example a 4″ grinder can go as deep as an inch and a 9″ grinder can go as deep as 3″ depending on the angle/ position. This grinder is very powerful, a bit heavy but that’s to be expected for a unit this size.
How deep can 230mm grinder cut?
The 230mm ANGLE GRINDER: for heavy-duty grinding, facing and cutting masonry and metal. As a cut-off machine it has a 64mm (2.5in) depth of cut. On some models, the rear handle rotates, to position the ON/OFF trigger for grinding or cutting.
