Set of four 4″ regular rotary tables with a 65 MM three-jaw self-centering chuck, back plate, and mounting hardware. Bolts with a T nu.
The chuck body is made of high-grain SG cast iron, and the jaws are made of tool steel. The jaws have been hardened and ground.
In order to mount the Chuck on the Tool Steel Back Plate, T nuts are supplied with it as well as the Chuck. The back plate has been drilled in such a way that it will fit both the three and four slot tables. The backside of the Plate is equipped with a locating Spigot that allows you to center the Mounting on the Table.
It can be mounted in both the horizontal and vertical positions at the same time. The hand wheel is graduated in 10-minute increments and has the option of being reset to zero.
DELIVERY IS EXTREMELY FAST.
Description of a 4″ (100 mm) Rotary Table, which is intended for use with smaller milling machines (see illustration). The table has a 100 mm diameter and is graduated 360 degrees. Worm Gear Ratio is -1:36, which means that one rotation of the handle will turn the table by a full ten degrees. Cente. In the vertical position, the height is approximately 2-1/16″ (50 mm), excluding the chuck. The hand wheel is graduated in 10-minute increments and has the option of being reset to zero. It is possible to mount it in both horizontal and vertical positions. Detailed description of the 65 mm 3 jaw self centering Chuck, which is constructed of high-quality materials, including SG iron for the body and tool steel for the jaws, which have been hardened and ground. The kit includes a mounting back plate as well as tee nuts and screws for installation. The back plate has been drilled in such a way that it can be used with either a three- or four-slot rotary table. In order to mount the Chuck on the Tool Steel Back Plate, T nuts are supplied with it as well as the Chuck. The back plate has been drilled in such a way that it will fit both the three and four slot tables. The backside of the Plate is equipped with a locating Spigot that allows you to center the Mounting on the Table.
The backlash is horrendous. don’t make a purchase
