(1) Dry Grinder with a speed of 4450 RPM (Non Water Feed). Fixed Speed (380W, 110V, 5/8″ hexadezimal) “-11 sppindle (minus eleven).
Designing a simple plan for a home improvement project (not for frequent usage contractor).
4450 RPM has been specifically designed for polishing (high RPM grinder CANNOT do polish, it breaks backer and burns pads.
13th Piece (No. 4) “Polishing Pad with Diamond Grit 50 100 200 400 800, 1 X Grit 1500 3000 5000, 2 X Grit 50 100 200 400 80. Buff.
1 Piece 4 (insert a number here) “Holder for velcro pads. Low RPMs do a good polishing job, but they are not very powerful, so please use them gently.
(1) Dry Grinder with a speed of 4450 RPM (Non Water Feed). Fixed Speed (380W, 110V, 5/8” hexadezimal) “-11 sppindle (minus eleven). Designing a simple plan for a home improvement project (not for frequent usage contractor). 4450 RPM is specifically designed for polishing applications (since high RPM grinder CANNOT do polishing job, they will break the backer and burn the pads). 13 Pieces of the Number 4 “They are as follows: 2 X Grit 50 100 200 400 800, 1 X Grit 1500 3000 5000 Buff, 1 X Grit 1500 3000 5000 Buff. 1 x 4 = 1 piece “Backer/Pad Holder with Velcro closure. Low RPMs do a good polishing job, but they are not very powerful, so please use them gently.
As a grinder, the RPMs are too high to be used as a polisher, so I ended up purchasing an attachment that allows me to control the RPMs.
WARNING TO BUYERS
