41/2 cut off disc for angle grinder Related Question:
Can you use an angle grinder with a cutoff wheel?
NEVER attach a Type 1 straight or cut-off wheel to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.
What is Type 27 cut off wheel?
A Type 27 Cut Off Wheel is often referred to as a depressed center wheel. The mounting hardware is in the depressed center, allowing for flush cutting. The Type 27 Cut Off Wheel must be used with an appropriate guard and a depressed center back flange. The center hub protects the user from cutting too deeply.
What is a cut off disc?
Cutting wheels (aka cut-off discs) are an abrasive tool used for fast cutting of materials like metal, concrete, and stone. Their portability allows the operator to move around freely with it and maneuver their tools from different angles to easily cut a material.
What is the thinnest cut off wheel?
Ultra-Thin Zip One Walter’s thinnest cut-off wheel at 1/32″ is designed for maximum precision cutting. Thanks to an innovative technology exclusive to Walter, ZIP One not only lasts, but it also allows you to more accurately cut thin metal without creating burrs.
What is the cutting thickness for an 18cm disc and what can you cut with it?
The 18cm discs can be used for small pieces of wood, thin metal and aluminium, which are 4-5cm thick. The 23 cm discs can cut larger pieces of any material that is 7-8cm thick.
What is a Type 41 wheel?
41 – FLAT CUTTING-OFF WHEELS. 42 – DEPRESSED CENTRE CUTTING-OFF WHEELS. The Type 41 and Type 42 grinding wheels make a numerous, popular group of general purpose and specialized abrasive tools intended for cutting-off various materials.
What is a Type 28 grinding wheel?
from 7.60. A HAT SHAPED GRINDING WHEEL designed to perform at a 10 to 15 degree angle, avoiding the operator fatigue one might experience when grinding with a Type 27. Delivers more abrasive grain to the work surface to ensure maximum material removal.
What size cutting disc do I need?
The size of the disc should have a direct bearing on your choice of angle grinder. The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work.
What is a Type 27 angle grinder guard?
Explanation: Type 27 & 28 guards are open on the bottom to allow for side grinding with raised hub/depressed center wheels. When side grinding with the Type 27 or Type 28 wheel, the work piece acts as a portion of the guard, protecting the operator in the event of a wheel breakage.
What is a cut off disc made of?
Cut-off Wheels are made of abrasive grain bonded with an organic bond system and used for cutting, notching and grinding. They are used with both portable and stationary tools on numerous materials including aluminum, plastic, sheet metal, stainless steel and more.
What is the difference between a cutting disc and a grinding disc?
Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting.
What is a cut off wheel for?
In short, cut-off wheels are used to change the shape of metal. Either to cut it off, or to cut out portions of it. They are not made for fine work. They leave the surface rough and it will likely need to be deburred and smoothed before using the pieces for their final application.
How do I choose a cut off wheel?
CUTTING WHEEL DIAMETER A wheel’s RPM rating tends to correspond with its diameter and the tool it is designed for. Common cutting wheel diameters range from 2 to 4 inches for die grinders, 4 to 9 inches for angle grinders, and 12 to 20 inches for chop, stationary, or high-speed saws.
What is a Type 42 abrasive wheel?
Type of Abrasive Wheel The wheel type signifies the wheel’s shape- this is marked as an ISO number e.g. ISO Type 27 – Reinforced Depressed Centre Grinding Wheels. Type 41 – Reinforced Flat Cut Off Wheels. Type 42 – Reinforced Depressed Centre Cut Off Wheels.
What blade Do I need to cut metal with angle grinder?
An angle grinder fitted with an abrasive metal-cutting disc works well to cut all kinds of metal, including bolts, angle iron, rebar and even sheet metal. But the discs wear down quickly, cut slowly and shrink in diameter as you use them. Instead, we recommend using a diamond blade that’s rated to cut ferrous metal.
