There are 27 different types and sizes of buffing pads, 15 types of sandpaper, 3 different types of backing plates, 1 type of screw driver, and one type of screw.
1 inch, 2 inch, and 3-inch polishing pads can be used for different grinding or polishing needs. There are three different sizes of #120 sandpaper that you can buy.
Different types of discs can be used with different types of polishing pads. Iron, wood, plastic, metal, rubber, stone, marble, and other materials can be ground and polished with this tool.
A built-in regulator in the sander lets you change the speed at which you work to meet your needs for sanding, polishing, and waxing. This allows you to get quick and accurate results.
Vibration is low at 15000 rpm. It is also very simple to use a small air sander. In order to be more efficient, the air polisher uses an eccentric double-rotation method. This method makes the polishing effect more even and smooth.
1-inch, 2-inch, and 3-inch air sander ki.
This is a professional orbital sander that comes with sanding pads that are 1 inch, 2 inch, and 3 inch long with hook and loop (Velcro Backing pad.
Iron, wood, plastic, metal, rubber, stone, marble, and other materials can be ground and polished with this tool.
2″ and 3″ random orbital air sanders have the following specs.
Pad Size: 1″ and 2″ and 3″ Velcro Backing pad. There are three different sizes.
The method of polishing: eccentric double-rotation.
Its diameter is 3mm.
During free speed: 15,000RPM.
In this case, the air consumption is 12 CFM (336 L/min) at 90 PSI.
A 1/4″ -19NPT air inlet and a rear end exhaust are what you need.
Box: What’s insid.
Toolpeak brand orbital air sander: 1 piece of this too.
3 pieces of hook and loop pad (1-inch, 2-inch, and 3-inch).
There is only one screwdriver needed to change the hook and loop pad.
3 pieces of black foam with a flat cut (1-inch, 2-inch, and 3-inch).
3 pcs of red flat-cut foam pads (1-inch, 2-inch, and 3-inch).
3 pcs of blue flat-cut foam pads (1-inch, 2-inch, and 3-inch).
3 black foam pads with wave-cut edges (1-inch, 2-inch, and 3-inch).
3 red wave-cut foam pads (1-inch, 2-inch, and 3-inch).
3 blue wave-cut foam pads (1-inch, 2-inch, and 3-inch).
15 pieces of #120 sandpaper: 1 inch*5 pcs, 2 inches*5 pcs, and 3 inches*5 pcs each.
3 wool ball pads that can be used to clean, polish, and wax.
3 wool discs that can be used to polish and wax, remove scratches, and fix car headlights (1-inch, 2-inch, and 3-inch).
These three wool tray pads are used to polish and wax the surface, remove scratches from the surface and repair car headlights (1-inch, 2-inch, and 3-inch).
A bright strip of polishing is used behind the glass of a car (1-inch, 2-inch, and 3-inch).
Quick connect: 1 pc American standard 1/4 NPT quick connec.
Oil for the air inlet should be put in before each time you use it.
The 6 inch DA sander and buffer came with this. It goes well with the set. Heavy and strong so far. The extra pads sold me.
