Access to this page has been denied because we believe you are using automation tools to browse the website. Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
48 alaskan chainsaw mill Related Question:
How big of a chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
Are chainsaw mills worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
How many cc is an Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be. Consult the chart to see if your chainsaw has enough power to do the job you want it to do.
Is it worth milling your own lumber?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
Can you mill with a 60cc chainsaw?
A 24″ bar is too much for a 60cc saw crosscutting, never mind ripping. Torque and lots of it is required for milling, even with that it is still hard work for the operator and the saw.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
How long should logs dry before being used to build?
You should seal the ends within minutes after being cut down; you should not wait hours, and definitely not days! The drying time will vary depending on the wood species and thickness of the logs, but they will take at least one to two years to dry – the longer you can leave them before you start building the better.
How much does it cost to mill lumber?
By the Board Foot Pricing varies by species and location but ranges from $0.25 to $0.50 per board foot of sawn lumber. This pricing method places all of the risk of productivity on the sawyer since the customer is only paying for the lumber they receive.
How much do sawmills charge?
The most stable or secure method for pricing for the mill owner is a flat, hourly rate. Rates vary from location to location and range upwards of $100 per hour plus extra charges for travel, broken blades, etc.