In terms of function, the chain saw blade is held in place between two steel plates, which provides a firm grip for carving. Regardless of the grain or knots in the material, the blade cuts through it with relative ease for the user.
The speed and maneuverability of the Angle Grinder Disc Chainsaw eliminates the need for heavy lifting when cutting, carving and removing wood, plastics, ice, and hard rubber. It is also ideal for sculpting hard rubber.
Dimensions: Arbor size: 16MM (3/5″), diameter: 102MM (4″), maximum speed (rpm): 25000; wheel thickness (in.): 0.5cm; wheel thickness (in.): 0.5c.
Arbor: 5/8″10000-13000rpm, 14000rpm maximum; for 4″ (100mm) or 4-1/2″ (115mm) Angle Grind; Arbor: 5/8″10000-13000rpm, 14000rpm maximu.
A smooth “finished” surface is achieved by using a contraction with a diameter of 4 inches and a tooth count of 22 teeth made of steel. This allows for minimal sanding afterward.
Maintenance: Chains can be sharpened with a chain saw file, or they can be replaced as needed. Excellent for curved work, such as the inside of bowls, because it allows for quick waste removal.
Color:Purpl. 5 Inch 14 Tooth Angle Grinder Attachment for 125 Angle Grinde.
Description.
Fine Cut Chain Set for 100/115 Angle Grinder with 22 Tooth Disc and Chain for 4 Inch Grinde.
It will be an excellent assistant for your angle grinder, and it has a variety of applications, including woodworkers, bricklayers, and welders, among others.
Specification.
Steel is the primary material.
4″ (100mm) in diamete.
Arbor: 5/8″ (16mm) diamete.
14000 revolutions per minute is the maximum speed.
The following sizes are compatible: 4″ (100mm) or 4-1/2″ (115mm. Grinder with an angled blad.
1 pc (one piece.
Features.
By reducing muscle fatigue and increasing speed and maneuverability, the Grinder Disc Chain Saw can be used for everything from cutting wood to carving, removing and sculpting plastics to removing ice and hard rubber. It is held in place between two steel plates, which allows for a secure grip on the chain saw blade when carving with it. Regardless of the grain or knots in the material, the blade cuts through it with relative ease for the user.
With our 22 tooth design, you’ll get a smooth, “finished” surface that will require little sanding afterward.
Depending on the situation, chains can either be sharpened with a chain saw file or replaced entirely.
Excellent for curved work, such as the inside of bowls, because it allows for quick waste removal.
Warning.
It is not recommended to use the switch lock feature on any grinder because it can cause damage to the machine. It is possible that this will result in serious injury or even death.
Included in the package.
1 x Grinder Disc and Chain (optional).
Notice.
It is not recommended to use the switch lock feature on any grinder because it can cause damage to the machine. Otherwise, once caught, it will cause the saw blade to break and splash, the cutting piece to break and splash, or the machine to become uncontrollable, which may cause damage to the item as well as injury to the individual.
If I can figure out how to do so, I’ll need to return this. It is sharp and functional, but the description states that it is compatible with 115mm grinders, which it does not with a safety guard. The description is extremely inadequate. When you look at the picture, it clearly states that the disc is 125mm in diameter, but when you read the description, you are misled. I used it once and then realized that it could not be used safely on a 115mm grinder because it did not have a shield. If a smaller size is available, you may return it or exchange it for it. The invoice and order do not have a return button that can be tapped. Since it had been sitting in my tool box until I needed it, it was most likely outside of the 30-day window. Do you have any suggestions for what to do?
