It comes with a spring and four air hammer.
It is common to use a sphere or a flat surface to make plates, rivets, and rivets out of metal.
Different shapes can do different things.
In this case, you can use the air hammer flat drill with pneumatic rivet hammers that have a handle diameter of about 10mm. You can also use it with pneumatic air guns that have a handle diameter of about 190mm.
suitable for tire repair, wind pipe seam, and other things.
High-quality alloy steel is used to make air hammer fittings that can last for a long time.
Specifications.
It’s made of alloy steel, which is stronger than steel.
Black is the color.
Its size is (L*D.
* Extended Length Air Hammer bit: 176 * 25mm (6.93 * 0.98 inch.
* Oval-shaped Head Air Hammer Bit: 3.20 x 1.37 in.
Bits: 102 * 30mm (4.01* 1.18 inch) and 80 * 35mm (3.14* 1.37 inch.
* Spring: 28*26mm (1.10* 1.02 inch) * Spring.
A package comes with.
Bits from the Air Hammer.
It’s spring.
Note.
If you want to use air hammer drill bits, you must put them in the Pneumatic Sewing Machine and connect them to the air compressor.
* Please allow up to 1-3mm of error due to the way we measure.
The two smallest hammers in this set don’t work with an air chisel that has a quick-change adapter, so you can’t use them. There is a good chance that they would work if you used a spring-type retainer.
The mid-sized hammer snapped its head off soon after it hit a brake rotor when it was used with a long barrel air chisel.
The long piece is strong enough, but a lot of power goes through it. When I use my 12″ Mayhew chisel bit, I think it sends more force down range.
