4″ flexible rubber backing pad and a granite bullnose tool from Stadea Granite Fabrication Tools Package. Includes a granite bullnose tool, wet polisher, diamond profile wheel B5, 4″ granite polishing pads set, and a 4″ flexible rubber backing pad. Stone Wet Polisher with DTM+ motor gear system with increased power and optimal speed required for stone concrete wet polishing or dry polishing; variable dial control to match the speed of either stone polishing process.
A bullnose tool for granite edge shaping, made by Stadea Diamond Profile Wheel Demi B5 (3/16″ or 5 MM), is included in the kit. A set of 7 diamond granite polishing pads from the Stadea Series Ultra D Wet is also included, which are designed for granite and quartz polishing. In addition, a 4″ semi-flexible rubber backing pad with a 5/8″ 11 thread is included. Seven granite polishing pads are included, one for each of the following grits: 50, 100, 200, 400, 800, 1500, and 3000.
Its ergonomic grip-size and long, out-of-core, soft back handle design transfers minimal polisher weight to the back handle, thereby reducing back hand fatigue. This, combined with the innovative head heavy polisher design, transfers machine weight to the stone concrete polishing surface, thereby increasing polishing pressure naturally and assisting in enhanced polishing performance, while also reducing back hand fatigue. The out-of-body back handle eliminates hand blockage in the air vent, resulting in increased motor performance and durability.
A built-in water quick-connect that connects to a standard water hose is included. Controlling the water pressure, using a water stopper, etc. Extra-long water line, water flow line under the polisher that does not interfere with polisher handling while in use, three-hole 120 degree water hole for even water distributio.
For easy removal of tool accessories, arbor locks are used. Soft-start, one-push power start & lock switch for the polisher for ease of use, splash guard with vacuum connector for water and dust control, and a reversible blade for versatility. Dual handle for a variety of applications. For stone polishing, a top D-handle is a must, as is an ambidextrous side handle for easy multi-purpose use, and an ergonomic backhandle. Class-A GFCIs are designed to provide enhanced electrical safety by protecting against potentially lethal electrical shock. Motor with double insulation. 12 feet of industrial-grade electrical cable that is extra-long.
The Stadea SWP110K Granite Fabrication Tools Kit includes a Granite Bullnose Tool for polishing granite edges. It is designed for granite edge polishing. Kit includes a 5″ DTM+ Stadea Wet polisher with a 3/16″ grit, a B5 Demi Bullnose profile wheel, 4″ diamond polishing pads for Granite polishing (7 pads set), and one backing pad for the polisher.
Designed to Exceed Expectation.
The machine is equipped with a durable DTM+ Motor Gear System that ensures the optimal speed and power required for stone wet or dry polishing and fabrication.
Because of the design of the head heavy polisher, as well as the out of core back-handle, it is possible to reduce back hand fatigue while increasing pressure on the surface of granite concrete.
Grip-Size Out of the Core has been improved. While in use, the ergonomic Back Handle design helps to reduce back hand fatigue. From the classic oversize main body hand-grip across the air vents comes a new, more comfortable back hand grip. It prevents air-vent hand blockage, which improves the performance and durability of the motor.
Electrical Safety is very important.
GFCI – A device that cuts off electricity in the event of a potentially hazardous electrical shock.
Electrical safety is improved by using double insulation.
Utilization Eas.
Underwater Feed â Reduces polishing interference to a minimu.
Controlling the water pressure and shutting off the wate.
Water quick-connect from water hose is built into the unit.
Water sprayer with three holes for even water distribution to unclog cut particles and unclog clog.
A water splash guard is used to control water spillage, and a vacuum connector is used to reduce dust during dry polishing.
Arbor Lock Button – Allows for the release of accessories from the polisher arbor without the use of a tool.
Power Lock Switch – A single push lock that allows for effortless continuous operation of the machine.
Speed Dial with Variable Speed â Adjusts the speed to the specific application for specific stone wet or dry polishin.
Handle is ergonomically designed for a comfortable grip and the best polishing performance possible.
Dual Front Handles â Top D-Handle for stone fabrication, and a side handle for general use .
Left and right handed users can use the ambidextrous side handle.
Long power cord and long water line â for easy access to long counters and sink.
This is an excellent product. Carry out the assignment.
