All Magnate™ bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. 24 raker to cut 1/16″ to 1/4″ thick material, * 18 raker to cut 1/8″ to 3/8″ thick material,* 14 raker to cut 3/16″ to 7/16″ thick material,* 10 raker to cut 1/4″ to 5/8″ thick material,* 6 Hook to cut 3/8″ to 2″ thick material,* 4 Hook to cut 3/4″ to 4-1/2″ thick material,* 3 Hook to cut 1″ to 6″ thick material,* 2 Hook to cut 2″ to 12″ thick material.
High speed steel tooth tips combined with flexible alloy steel backing material results in band saw blades that are the most cost effective choice for most metal sawing applications. These band saws will cut faster and last longer than any other band saw blade in a wide variety of sawing applications. BAND SPEEDThe rate at which the band saw blade moves across the work to be cut.
Carbon blades are ideal for short production / maintenance / general purpose applications using low alloy steel and non-ferrous metals and also wood production. 14 and 18tpi are great for general purpose metal cutting. 32tpi is great for thin sheet metal or thin tubed material.
Free delivery excludes assembly and same day delivery…Ace Neighborhood Toolbox Program – Beta Test Program members may rent select tools from Participating Beta Test Program Retailers, subject to the following requirements and limitations:Tool rental requires a signed Ace Neighborhood Toolbox Agreement between you and your Participating Beta Test Program Retailer. If you purchase a Beta Test Program membership but are ineligible for the Beta Test Program at the time of purchase because you do not reside in the delivery service area of a Participating Beta Test Program Retailer, you may elect to terminate your membership for a refund of your membership fee. If you purchase a Beta Test Program membership but become ineligible for the Beta Test Program because you move outside the delivery service area of a Participating Beta Test Program Retailer during the term of your membership, you may elect to terminate your membership, but you will not receive a refund of your membership fee.
Please enter a quantity of $qty dummy$ or less Please enter a quantity of 1 Purchases are limited to $qty dummy$ per buyer Please enter quantity of 1 or more Please enter a lower number Choose quantity that is less than $qty dummy1$ or equal to $qty dummy$ You can only choose quantity that is equal to $qty dummy$.
57 inch metal bandsaw blade Related Question:
How thick of metal can a bandsaw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
Can you put a metal blade on any bandsaw?
Wood bandsaws run at too high a speed. Even just changing to a metal cutting blades will eat blades up fast if your cutting anything thicker than 20 ga. aluminum.
What blade is best for metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What band saw blade for steel?
Carbide (or carbide-tipped) band saw blades are ideal for cutting materials such as high-nickel alloy steel , HASTELLOY, titanium, MONEL, and INCONEL since they are able to withstand greater amounts of heat and maintain their edges for longer when used to routinely and continually cut especially hard metals.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
What is the difference between a metal and wood band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
What speed does a metal bandsaw run at?
The speed range for cutting wood is wide but a comfortable speed is about 3000 fpm. The range for metal cutting however is around 300.. a big difference. The other difference is of course in the blade itself.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
How long do metal cutting blades last?
No matter how much care you give to your blade, a time eventually comes when it needs to be changed. On average, a typical cold saw blade should last at least six months. Damaged teeth.
Can carbide tipped blade cut metal?
Carbide metal cutting blades offer a full range of sizes and profiles for cutting both ferrous and non-ferrous metal. Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel.
How do you pick a metal band saw blade?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
What are the three main types of bandsaw blades?
There are three basic tooth styles in bandsaw blades: regular, skip and hook. Regular tooth blades have proportionally spaced teeth and are ideally suited for general-purpose cutting and contour sawing. Regular blades are ideal for cutting thin materials with a fine finish.
What are bimetal bandsaw blades made of?
Bimetal band saw blades are aptly named because they are made from 2 different metals – a flexible carbon steel backer and a much harder tooth edge which is attached to the backer. Usually this tooth edge is made from M42 Cobalt steel which is why you will often hear the term M42 Saw blades in reference to bimetal.