High speed steel tooth tips combined with flexible alloy steel backing material results in band saw blades that are the most cost effective choice for most metal sawing applications. These band saws will cut faster and last longer than any other band saw blade in a wide variety of sawing applications. BAND SPEEDThe rate at which the band saw blade moves across the work to be cut.
59 1/4 bandsaw blade for metal Related Question:
What TPI is best for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Can I put a metal cutting blade on my band saw?
Typically if you run a metal blade on a wood bandsaw the excessive speed (2000 sfpm+) of the wood saw will knock the teeth off of your metal cutting blade in a hurry. You could make it work, but you would have to slow the blade drive wheel way down. Think 250 sfpm to 80 sfpm.
What band saw blade for steel?
Carbide (or carbide-tipped) band saw blades are ideal for cutting materials such as high-nickel alloy steel , HASTELLOY, titanium, MONEL, and INCONEL since they are able to withstand greater amounts of heat and maintain their edges for longer when used to routinely and continually cut especially hard metals.
What is the best blade for cutting metal?
We recommend using a diamond blade that’s labeled as a ferrous-metal-cutting blade, but many tradespeople use a regular masonry diamond blade with good results.
How do you measure a TPI on a bandsaw blade?
To avoid stripping teeth, always have a minimum of three teeth in the work surface How to measure TPI: Measure 1 or 2 inches along the blade from the center of the gullet. Count the number of teeth in that space. This is the TPI.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
Can you use a bandsaw for wood and metal?
Yes you can. Get a metal cutting blade and off you go. Wood bandsaws are really too fast but they will do the job, you will go through the blades quicker. Just go slowly, don’t think you will cut steel as fast as you do wood.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What is a 3h bandsaw blade?
Description. These are excellent-quality steel bandsaw blades that excel at ripping thick stock and resawing, and are also suitable for roughing blanks for carving or turning. The coarse 3 tpi hooked teeth power through hard woods and difficult grain, and have deep gullets for clearing sawdust.
How thick of metal can a band saw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
How do you pick a metal band saw blade?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
What is a raker tooth bandsaw blade?
A raker blade has an odd-numbered tooth sequence with a uniform set angle. A basic, three-tooth sequence is left, right, and straight, or unset. The straight tooth is the raker tooth.
Can carbide blade cut metal?
Carbide metal cutting blades offer a full range of sizes and profiles for cutting both ferrous and non-ferrous metal. Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel.