59 1/2 bandsaw blade metal cutting Related Question:
What TPI is best for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Can I put a metal cutting blade on my band saw?
Typically if you run a metal blade on a wood bandsaw the excessive speed (2000 sfpm+) of the wood saw will knock the teeth off of your metal cutting blade in a hurry. You could make it work, but you would have to slow the blade drive wheel way down. Think 250 sfpm to 80 sfpm.
How thick of metal can a bandsaw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
What is the best blade for cutting metal?
We recommend using a diamond blade that’s labeled as a ferrous-metal-cutting blade, but many tradespeople use a regular masonry diamond blade with good results.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
Can you use a bandsaw for wood and metal?
Yes you can. Get a metal cutting blade and off you go. Wood bandsaws are really too fast but they will do the job, you will go through the blades quicker. Just go slowly, don’t think you will cut steel as fast as you do wood.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
Can carbide blade cut metal?
Carbide metal cutting blades offer a full range of sizes and profiles for cutting both ferrous and non-ferrous metal. Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel.
How long do metal cutting blades last?
No matter how much care you give to your blade, a time eventually comes when it needs to be changed. On average, a typical cold saw blade should last at least six months. Damaged teeth.
What saw cuts through metal?
Hacksaws are a hand tool that is a very versatile addition to any workshop. Hacksaws work by simply moving the blade through the metal backwards and forwards in a regular ‘sawing’ action.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.