APPLICATION: These 6 “Flap wheels made of aluminum oxide are used to blend, deburr, dimension, and scale a wide range of metals and alloys.
Metal, wood, rubber, plexiglass, and plastic are some of the materials that can be used.
MACHINE: This machine is intended for use with portable drills, bench grinders, and air tools, among other things.
GRITS: These flap wheels are available in a wide range of grits, ranging from 40 (coarse) to 320 (fine) (fine).
The following measurements: 6″ diameter x 2″ flap width x 1” “Hole in the middle.
320 Grit is the name of the pattern.
Aluminum oxide flap wheels from Benchmark Abrasives are designed to blend, deburr, dimension, and descale a variety of metals, including carbon steel, while also removing scale and rust. In addition to being a synthetic mineral known for cutting sharply without compromising its geometry, aluminum oxide also has the advantage of allowing you to complete the job correctly and efficiently. Large flap wheels that are not mounted can conform to a wide range of shapes and are particularly effective on pipes, tubes, and other cylindrical work pieces. The 6 inch by 2 inch by 1 inch flapper wheel is the abrasive you’re looking for if you have a flat or irregular surface that’s made of metal, wood, rubber, fiberglass, or plastic that needs to be ground, blended, deburred, cleaned, polished, or sanded.
The hole in the center is too small. The material was not cut to the proper size.
