Now I haven’t used a Mac since the 60’s so would like to know how old this saw would be and what would be the proper oil to gas I should be using. The only complaints I had were, weight, sharp corners and the oiler wouldn’t oil. The Pro Mac 610/650 manual that came with it says “Use only regular grade leaded gasoline. Do not use highly leaded, unleaded or low lead gasolines. Chain saw fuel is a mixture of gasoline and lubricating oil. The correct ratio of.gasoline to oil is very important. Follow the ratios in the Fuel Mixture Table. McCulloch 40:1 Two-Cycle Custom Lubricant is recommended. If not available, use a good grade SAE 40.two-cycle oil at a ratio of 20 to 1.”.
I’ve pieced together a fair number of Echo saws as well. I’ve never been able to find anything regarding the 610, 605, etc. Not really concerned with any of the saws under about 50cc. Except maybe the 3200, 1635av & 1838av.
610 mcculloch chainsaw specs Related Question:
How many cc is a 610 McCulloch chainsaw?
Re: Stihl Equivalent to McCulloch Pro Mac 610 Both are 60cc, but the Stihl will be lighter, smoother and more powerfull.
What year was the McCulloch Pro Mac 610 made?
A chainsaw revolution Another chainsaw revolution occured in 1968, when McCulloch introduced Power Mac 6.
How many cc’s is a McCulloch timber bear?
yeah, it’s only 55cc’c.
How many cc is a McCulloch 605?
The PM 605 is one of the later versions of the 600 series Macs . A tad smaller at 58 cc instead of 60 like the Pm 610-650 ,Timber wolf 3.7 . The oiler is an impulse operated diaphragm pump mounted left side forward under the air box cover .
How many cc is a McCulloch eager beaver chainsaw?
Mcculloch’s Eager Beaver trimmers are the 282 (model numbers 400128-05 and 400128-47) and the 287 (model numbers 400128-10, 400128-28, 400128-48 and 400128-52). The 282 features a 28cc direct drive engine, 44-inch shaft, D handle and is 9.9 lbs.
How many cc is a McCulloch 10 10?
The McCulloch Pro-Mac 10-10 has a one-cylinder, 3.3 cubic inch engine (54 cc). It also has a cylinder bore of 1.75 inches, a piston stroke of 1.375 inches and a piston-ported intake.
Is McCulloch a good chainsaw?
Whether cutting firewood or felling large trees, all McCulloch chainsaws have strong engines, great ergonomics and superior durability. With a high chain speed, and a slimmed-down lightweight design McCulloch’s chainsaws are probably the smoothest chainsaws you’ve ever tried.
What kind of oil does a McCulloch chainsaw use?
McCulloch recommends substituting SAE 30 and SAE 10 motor oil in its place for older models of chain saws. Newer models can use SAE 30 motor oil or a good quality brand of bar and chain oil such as McCulloch eco-friendly vegetable based chain oil.
How do you adjust the carburetor on a McCulloch chainsaw?
Locate the low speed adjusting screw on your McCulloch chainsaw’s carburetor. Turn the low speed adjusting screw with the small screwdriver slowly clockwise until your hear the engine producing surging noises. Stop turning and rotate it counterclockwise until your hear the engine producing bubbling noises.
How do you adjust an eager beaver chainsaw?
Adjust the idle screw, which is the one marked “I,” by turning it clockwise until the chain starts moving, then turning it counterclockwise by 1/4 turn. Make sure the blade stops moving. If it continues to spin, turn the screw counterclockwise until movement stops.
How many cc is a McCulloch 250 chainsaw?
Re: Old McCulloch Chainsaws The 250 is 80 cc and the super is 87 cc .
How many cc’s is a Homelite Super XL?
The engine in the Homelite XL Chain Saw displaces 58.2 cc and has one cylinder. The bore is 1.8 inches and the stroke is 1.4 inches.
Who bought out McCulloch?
In January 1999, the company filed for Chapter 11 bankruptcy and sold its European division to Husqvarna AB. In October 1999, its North American operation was acquired by the Taiwanese company Jenn Feng Industrial Co.
Is McCulloch made by Husqvarna?
McCulloch Today In 1999 McCulloch sold its European division to Husqvarna AB. Nine years later, Husqvarna also acquired the rights to the McCulloch brand on the North American market. Since then, McCulloch is a brand within the Husqvarna Group.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.