Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods, plastics, and non-ferrous metals. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use. 20 – 24 variable to cut 1/16″ to 1/4″ thick material, * 14 – 18 variable to cut 1/8″ to 3/8″ thick material, * 10 – 14 variable to cut 3/16″ to 7/16″ thick material, * 8 – 12 variable to cut 1/4″ to 1/2″ thick material, * 6 – 10 variable or 6 Hook to cut 5/16″ to 5/8″ thick material, * 5 – 8 variable or 6 Hook to cut 3/8″ to 1″ thick material, * 4 – 6 variable or 6 Hook to cut 1/2″ to 2″ thick material, * 3 – 4 variable or 4 Hook to cut 3/4″ to 4-1/2″ thick material, * 3 Hook to cut 1″ to 6″ thick material, * 2 Hook to cut 2″ to 12″ thick material.
High speed steel tooth tips combined with flexible alloy steel backing material results in band saw blades that are the most cost effective choice for most metal sawing applications. These band saws will cut faster and last longer than any other band saw blade in a wide variety of sawing applications. BAND SPEEDThe rate at which the band saw blade moves across the work to be cut.
62 inch bandsaw blade for metal Related Question:
What TPI is best for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What is the best blade for cutting metal?
We recommend using a diamond blade that’s labeled as a ferrous-metal-cutting blade, but many tradespeople use a regular masonry diamond blade with good results.
How thick of metal can a band saw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
Can I put a metal cutting blade on my band saw?
Typically if you run a metal blade on a wood bandsaw the excessive speed (2000 sfpm+) of the wood saw will knock the teeth off of your metal cutting blade in a hurry. You could make it work, but you would have to slow the blade drive wheel way down. Think 250 sfpm to 80 sfpm.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
Can carbide blade cut metal?
Carbide metal cutting blades offer a full range of sizes and profiles for cutting both ferrous and non-ferrous metal. Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel.
Can I cut metal with a diamond blade?
Yes, certain diamond blades can cut through metal, but this will depend entirely on the blades application. Most diamond blades are used to cut through concrete, brick, tile, and asphalt.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Can you use a bandsaw for wood and metal?
Yes you can. Get a metal cutting blade and off you go. Wood bandsaws are really too fast but they will do the job, you will go through the blades quicker. Just go slowly, don’t think you will cut steel as fast as you do wood.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
Can a band saw cut stainless steel?
Bi-metal band saw blades cover the broadest range of sawing applications. 95% of companies and individuals cutting the following materials should use a bi-metal band saw blade: carbon steel, tool steel, structural steel, stainless steel, pipes/tubing, die steel, angles, flat stock and mixed metal applications.
Can you use a band saw to cut aluminum?
Band saws generally make sense for aluminum stock of 6 in. diameter and larger and for shops that are interested in high-speed cutting of aluminum but also frequently cut other materials.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.