The only time i didn’t get a clean cut the edge was off my cutters, you get a fussy-wussy cut. I’ve had guys have a little to much angle on cutters and high rakers and top cutter edge wasn’t filed right. 404 chain cuts quite a bit wider kerf than most 3/8 s. The 3/8 s Dura Pro chain cut the same kerf as 52 AJ or Ak ect.
63 gauge chainsaw chain Related Question:
Does chain gauge matter on a chainsaw?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
Can you use .050 chain on a .063 bar?
050 chain is for a 32″ bar, and the “like new” . 063 bar and chains are 25″. And yes, the chains are the correct sizes for the bars.
How do I know what gauge my chainsaw chain is?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
Can I use a different gauge chain?
Drive sprockets can drive any gauge chain, only the pitch matters.
Will Oregon chains fit Stihl?
Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .
What size chain is on my Stihl chainsaw?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What is a 420 chain?
– All PEER roller chains incorporate solid rollers enhancing rotation on the. bushing while reducing impact loads on the sprocket tooth during operation. – All chain components are heat treated to achieve maximum strength. and greater wear resistance.
Can you use different pitch on chainsaw?
The pitch is the distance between the drive teeth on the chain and the spacing of the spurs on the sprocket. Different pitch chains are not interchangeable. The three common chain pitch sizes are 3/8″ lo-pro, . 325 and 3/8.
Can you change the pitch on a chainsaw chain?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
What is a ripping chain for a chainsaw?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.